Reference Section

Connecting the Camera to a TV (Viewing Images on a TV)

3Set the TV’s input to external video input.

See the documentation provided with your TV for details.

4Hold down the cbutton to turn on the

camera.

The camera enters playback mode and images are displayed on the TV.

While connected to the TV, the camera monitor will remain off.

BNotes About Connecting the HDMI Cable

An HDMI cable is not included. Use a commercially available HDMI cable to connect the camera to a high-definition TV. The output terminal on this camera is an HDMI mini connector (type C). When purchasing an HDMI cable, be sure that the device end of the cable is an HDMI mini connector.

We recommend shooting still images at an Image mode (A 63) setting of M2048×1536 or higher, and movies at a Movie options (E52) setting of nHD 720p (1280×720).

BNotes About Connecting the Cable

When connecting the cable, be sure that the camera connector is properly oriented. Do not use force when connecting the cable to the camera. When disconnecting the cable, do not pull the connector at an angle.

Do not connect cables to the HDMI mini connector (Type C) and to the USB/audio/video output connector simultaneously.

BIf the Images Are Not Displayed on the TV

Be sure that the camera’s video mode setting in the TV settings (E68) under the setup menu conforms to the standard used by your TV.

CUsing a TV Remote Control (HDMI Device Control)

The remote control of an HDMI-CEC-compatible TV can be used to control playback.

It can be used instead of the camera’s multi selector and zoom control to select images, start and pause movie playback, and switch between full-screen playback mode and 4-image thumbnail display.

Set the HDMI device control setting (E68) of TV settings to On (default setting) and then connect the camera and TV using an HDMI cable.

Aim the remote control at the TV when operating it.

Refer to the TV’s operating instructions for information about the TV’s HDMI-CEC compatibility.

E22

Page 128
Image 128
Nikon COOLPIXS6200RED, 26277 Set the TV’s input to external video input, Hold down the cbutton to turn on Camera, E22