Nikon 26277, S6200 manual Using the Zoom, Frame a Picture, Digital Zoom and Interpolation

Step 3 Frame a Picture

Using the Zoom

Use the zoom control to activate optical zoom. Zoom out Zoom in

•To zoom in closer to the subject, rotate the zoom

control to g (telephoto).

•To zoom out and view a larger area, rotate the zoom

control to f (wide-angle).

When you turn the camera on, the zoom moves to the maximum wide-angle position.

• A zoom indicator is displayed at the top of the monitor when the zoom control is rotated.

Digital Zoom

Optical Digital zoom zoom

The Basics

When the camera is zoomed in to the maximum optical zoom position, rotating and holding the zoom control at g triggers digital zoom.

Digital zoom can magnify the subject up to about 4× beyond the maximum magnification of the optical zoom.

Maximum optical zoom Digital zoom enabled

•When you are using digital zoom, the camera focuses on the subject in the center of the frame and the focus area is not displayed.

CDigital Zoom and Interpolation

Unlike optical zoom, digital zoom uses a digital imaging process known as interpolation to magnify images, resulting in slight deterioration of picture quality according to the image mode (A 63) and digital zoom magnification.

Interpolation is applied at zoom positions beyond Vwhen taking still images.

When zoom is increased beyond the Vposition, interpolation is initiated and the zoom indicator turns yellow to indicate that interpolation is being applied.

The position of Vmoves to the right as image size decreases, allowing you to confirm the zoom position at which shooting without interpolation is possible at the current image mode setting.

Small image size

of Shooting and Playback

• Digital zoom can be disabled from the Digital zoom option in the setup menu (A 88). 27