Chandelier MOUNTING AND WIRING INSTRUCTIONS

CHANDELIER MOUNTING AND WIRING INSTRUCTIONS

NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fix- tures meet all UL specifications.

1.Turn off power at circuit box to avoid possible electric shock.

2.Secure mounting bar (A) to outlet box (B) with outlet box screws (C) (not included) (see fig. 1).

3.Thread hex nut (D) onto nipple 1 (G1) approximately 1/4 inch and insert lock washer (F), then thread nipple 1 (G1) onto mounting bar (A) and secure with hex nut (D).

4.Slide column (J) down over nipple 2 (G2).

5.Thread nipple 2 (G2) onto couplng (H) (carefully twist loop (I) to secure nipple 2 (G2) if needed). Do not twist or kink wires.

6.Open one link on bottom end of chain (K). Attach to loop (I). Securely close link on chain (K).

7.Thread screw collar ring (L) onto screw collar (M), then place canopy (N) over top of screw collar (M).

8.Lace wires up through every other link on chain (K) then through screw collar (M) and nipple 1 (E1).

9.Open one link on top end of chain (K). Attach to loop on screw collar (M). Securely close link on chain (K).

10.Identify color coding of fixture wires (see fig. 2).

11.To connect wires, take black fixture wire (group A from fig. 3) and place evenly against black outlet box wire. Do not twist wires.

12.Fit wire connector (O from fig. 1) over wires and twist until there is a firm connection. If wire connector (O) easily comes off, reattach and check again for a firm connection.

13.Repeat steps 11 and 12 with the white (group B from fig. 3) fixture wires and outlet box wires.

14.Partially thread green grounding screw (P) into side hole (Q) on mounting bar (A)

15.Wrap ground wire from fixture around green grounding screw (P), leaving enough excess wire to then connect ground wire and outlet box wire with wire connector (O), if applicable.

16.Tighten green grounding screw (P). Do not over tighten.

17.Tuck wires inside outlet box (B).

18.Remove screw collar ring (L) from screw collar (M).

19.Secure screw collar (M) to nipple 1 (E1).

20.Raise canopy (N) to ceiling and thread screw collar ring (L) to screw collar (M) and tighten as necessary.

FIXTURE ASSEMBLY INSTRUCTIONS

Warning: This fixture is for indoor use only.

1.Raise shade (R) up to socket assembly (S) and secure with retaining ring (T).

NOTE: if retaining ring(s) (T) was preinstalled, remove before installing glass shade(s) (R).

2.Install lamp(s). Do not exceed recommended wattage.

3.Thread hex nut (X) onto nipple 3 (G3), then thread nipple 3 (G3) into lower fixture base (Y). Place decorative cap (V) over nipple 3 (G2) and secure with finial (U).

4.Turn power back on at circuit box.

120112 specifications

The Westinghouse 120112 model is a noteworthy combination of design, innovation, and functionality, making it an ideal choice for a variety of applications, particularly in industrial and commercial settings. This particular model has gained attention for its robust performance and advanced features, setting it apart in the competitive landscape of electrical equipment.

One of the main features of the Westinghouse 120112 is its high efficiency and reliable operation. Engineered to deliver consistent performance, the unit is designed with state-of-the-art technology that minimizes energy consumption while maximizing output. The combination of smart energy management strategies ensures that users can save on operational costs while maintaining high productivity levels.

In terms of technology, the Westinghouse 120112 incorporates advanced control systems that facilitate easy monitoring and management. The inclusion of digital interfaces allows users to track performance metrics in real time, providing insights that can help in optimizing operations. Additionally, the model is equipped with surge protection and fault detection systems, ensuring safe and reliable operation under all conditions. This focus on safety is critical, especially in environments where electrical equipment is frequently subjected to fluctuations or potential threats.

Another characteristic that enhances the Westinghouse 120112’s appeal is its durability. Constructed using high-quality materials, the unit is designed to withstand harsh environmental conditions, which is essential for outdoor installations or industrial applications. Its rugged design also translates into lower maintenance requirements, which is a significant advantage for users looking to minimize downtime.

The Westinghouse 120112 also boasts versatility, making it suitable for a range of uses, from powering large machinery to serving as part of a comprehensive electrical system. Its adaptability means it can easily be integrated with existing infrastructure, allowing businesses to upgrade their systems without extensive overhauls.

In summary, the Westinghouse 120112 model stands out for its efficiency, advanced technology, robust safety features, and durability. Its design caters to the needs of various industries, fostering an environment where performance and reliability are paramount. Whether for industrial, commercial, or specialized applications, the Westinghouse 120112 embodies the next generation of electrical equipment, making it a compelling choice for those looking to invest in quality and innovation.