Westinghouse 120112 owner manual Semi-Flush Mounting And Wiring Instructions

Page 6

SEMI-FLUSH MOUNTING AND WIRING INSTRUCTIONS

NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures meet all UL specifications.

1.Turn off power at circuit box to avoid possible electric shock.

2.Thread mounting screws (D) into cross bar (A) approximately 1/4 inch (see fig. 1).

3.Secure cross bar (A) to outlet box (B) with outlet box screws (C).

4.Slide column (J) and cap (M) down over nipple 2 (G2).

5.Thread nipple 2 (G2) onto coupling (H). Do not twist or kink wires.

6.Select number of stems (E) to install based on desired fixture length, then connect stems (E).

7.Thread fixture wires up through stem(s) (E), coupling (F), and canopy (G).

8.Thread stem (E) onto the nipple 2 (G2), then secure the stem (E) into the coupling (F).

9.Identify color coding of fixture wires (see fig. 2).

10.To connect wires, take black fixture wire (group A from fig. 2) and place evenly against black outlet box wire. Do not twist wires.

11.Fit wire connector (O from fig. 1) over wires and twist until there is a firm connection. If wire connector (O) easily comes off, reattach and check again for a firm connection.

12.Repeat steps 10 and 11 with the white (group B from fig. 2) fixture wires and outlet box wires.

13.Partially thread green grounding screw (P) into side hole (Q) on cross bar (A) (see fig. 1).

14.Wrap ground wire from fixture around green grounding screw (P) leaving enough excess wire to then connect ground wire and outlet box wire with wire connector (O), if applicable.

15.Tighten green grounding screw (P). Do not over tighten.

16.Tuck wires inside outlet box (B).

FIXTURE ASSEMBLY INSTRUCTIONS

Warning: This fixture is for indoor use only.

1.Raise canopy (G) to ceiling, allowing mounting screws (D) to protrude through openings in canopy (G), and secure into place with cap nuts (I) (see fig. 1)

2.Raise shade (R) up to socket assembly (S) and secure with retaining ring (T).)

NOTE: if retaining ring(s) (T) was preinstalled, remove before installing glass shade(s) (R).

3.Install lamp(s). Do not exceed recommended wattage.

4.Thread hex nut (X) onto nipple 3 (G3), then thread nipple 3 (G3) into lower fixture base (Y). Place decorative cap (V) over nipple 3 (G2) and secure with finial (U).

5.Turn power back on at circuit box.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Guide d’utilisation Manual del Usuario WARRANTY INFORMATION Warranties expressed or impliedLine art shown may not exactly match the fixture enclosed Chandelier MOUNTING AND WIRING INSTRUCTIONS FIXTURE ASSEMBLY INSTRUCTIONSLine art shown may not exactly match the fixture enclosed SEMI-FLUSH MOUNTING AND WIRING INSTRUCTIONS Garantie Limitée DE Cinq ANS Les instructions d’installation demeurent cependant valables Montage DU Lustre ET Instructions DE Câblage Page Fixation SEMI-ENCASTRÉE ET Instructions DE Câblage Garantía Limitada DE Cinco Años Advertencia UNA Descarga Eléctrica Podría Causar LesionesFigura INSTRUCCIONES DE Montaje DEL Artefacto Montaje DEL Candelabro E Instrucciones DE CableadoCable DE Instalación Casi AL RAS E Instrucciones DE Cableado MISE EN GARDE ORDERING PARTS CLEANING AND CARECommande DE Pièces Nettoyage ET Entretien

120112 specifications

The Westinghouse 120112 model is a noteworthy combination of design, innovation, and functionality, making it an ideal choice for a variety of applications, particularly in industrial and commercial settings. This particular model has gained attention for its robust performance and advanced features, setting it apart in the competitive landscape of electrical equipment.

One of the main features of the Westinghouse 120112 is its high efficiency and reliable operation. Engineered to deliver consistent performance, the unit is designed with state-of-the-art technology that minimizes energy consumption while maximizing output. The combination of smart energy management strategies ensures that users can save on operational costs while maintaining high productivity levels.

In terms of technology, the Westinghouse 120112 incorporates advanced control systems that facilitate easy monitoring and management. The inclusion of digital interfaces allows users to track performance metrics in real time, providing insights that can help in optimizing operations. Additionally, the model is equipped with surge protection and fault detection systems, ensuring safe and reliable operation under all conditions. This focus on safety is critical, especially in environments where electrical equipment is frequently subjected to fluctuations or potential threats.

Another characteristic that enhances the Westinghouse 120112’s appeal is its durability. Constructed using high-quality materials, the unit is designed to withstand harsh environmental conditions, which is essential for outdoor installations or industrial applications. Its rugged design also translates into lower maintenance requirements, which is a significant advantage for users looking to minimize downtime.

The Westinghouse 120112 also boasts versatility, making it suitable for a range of uses, from powering large machinery to serving as part of a comprehensive electrical system. Its adaptability means it can easily be integrated with existing infrastructure, allowing businesses to upgrade their systems without extensive overhauls.

In summary, the Westinghouse 120112 model stands out for its efficiency, advanced technology, robust safety features, and durability. Its design caters to the needs of various industries, fostering an environment where performance and reliability are paramount. Whether for industrial, commercial, or specialized applications, the Westinghouse 120112 embodies the next generation of electrical equipment, making it a compelling choice for those looking to invest in quality and innovation.
Top Page Image Contents