ASSEMBLY INSTRUCTIONS
Before assembling, please review all instructions.
1.Carefully lay out all parts on flat surface as shown in illustration.
2.Screw post (B) into the base (A) and hand tighten.
3.Screw post section (C) into post (B) and hand tighten.
4.Rotate shade (G) to right angle with body (E) and parallel to the floor. Then, use the (included) Allen wrench (F) to carefully tighten the screw.
5.Loosen the thumbscrew (D) to adjust the lamp height. Raise or lower the lamp body (E) to the desired height and tighten the thumbscrew (D).
6.Remove thumbscrew from Optix® filter on lamp head and carefully slide filter out of channel and place on clean surface (Fig. 1).
7.Remove the 27 W Natural Spectrum® bulb from the packaging and carefully insert it into the socket as demonstrated in Figure 2. Be sure to hold the bulb by the base and ensure it is fully inserted into the socket and clipped into the metal clip on both sides of bulb. Note the telephone number on the bulb provides contact information when reordering.
8.Slide Optix® filter back into place and
9.Plug lamp into an appropriate outlet and turn on the switch.
10.Do not use with an extension cord or on a circuit with a dimmer switch.
11.Save the packaging in case you need to send the lamp to Verilux for servicing.
3