Care and Maintenance
Cleaning the Inlet
If the inlet is blocked by dust, completely remove the foreign materials – after first turning the vacuum OFF.
A blocked inlet may result in weakened suction and noise. If the inlet is blocked, there is also a risk of damage or malfunction caused by overheating.
Emptying the Collection Cup | Inlet |
|
1.Disconnect the handheld vacuum cleaner from the base unit by pressing the release lever at the rear of the base unit and lifting up.
2.Press the collection cup lock button to
release the collection cup from the vacuum (see Figure 3).
3.Carefully pull the filter assembly outward and remove (see Figure 4).
Collection Cup
Lock Button
4. Empty the cup. | Figure 3 |
Cleaning the Filters
5.Unlock the outer filter by twisting it slightly to the right, clockwise (see Figure 5).
6.Remove the outer filter by pulling it away from the main casing.
7.Pull the inner filter out to remove.
8.The filters should be cleaned every time the collection cup is emptied by tapping them on the side of the collection cup to release trapped dust.
9.Wash both filters in lukewarm water on a regular basis.
10.Make sure the filters are completely dry before reassembly.
11.Reassemble in the reverse order.
Filter Collection
Assembly Cup
Figure 4
Figure 5
Outer Filter | Inner Filter |
10