Troubleshooting, Poor Suction, Safety Switches

Troubleshooting

The filter may be blocked.

•Remove and clean the filter. The collection cup may be full.

•Empty collection cup.

Vacuum cleaner may not be fitted to base unit correctly.

• Ensure the cleaner is securely locked into position.

Safety switch may not be depressed or sensors not covered.

•Sensor switches only operate when the base is level and in contact with the surface being cleaned.

The UV-C light will only turn on when the vacuum cleaner is facing downward and in contact with the surface being cleaned.

On the bottom of the base unit, there is a pressure sensitive wheel. The wheel is activated when it contacts a cleaning surface.

Three additional sensors must also be covered for the UV-C bulb to work. Do not manually override the pressure sensitive wheel or cover the sensors.