Care and Maintenance — continued
Avoiding Exposure to Dust
When emptying any vacuum cleaner, it is difficult to avoid exposure to dust. If you are an allergy sufferer or sensitive to dust, you can minimize this risk.
1.Place the collection cup in a large bag, and close the bag as tightly as possible around the cup before emptying it.
2.Remove the collection cup, close the bag tightly and dispose of immediately.
You might also consider wearing disposable gloves and a facemask while emptying the collection cup. Or, ask a
It is important to empty the collection cup and clean the filters regularly. If this is not done, the cleaner will lose its effectiveness.
We recommend that you empty and clean the vacuum after each use.
Cleaning the UV-C Bulb
During use, dust may collect on the protective cover and the
1.Vacuum should be turned off prior to cleaning the bulb. Detach the protective grill on the bottom of the base unit by gently pulling up on the two tabs at the back of the covering (see Figure 6). Set the cover aside and wait for bulb to cool.
2.Using a soft
3.Replace the protective cover by aligning it, pressing on the rear tabs to snap them into position and finally pressing down the front of the cover, which will click into place.
Figure 6 | Figure 7 |
11