JVC VN-C10 manual

Page 24

Preparations (Step 2 Setting the Network)

2-3 Setting the IP Address for VN-C10 with V.Networks Setup Tool

Set the IP address for VN-C10 by using the installed [V.Networks Setup Tool]. (With this [V.Networks Setup tool] only VN-C10, not other models, can be connected.)

Caution

●After the power for VN-C10 is turned on, there will be about 20 seconds until VN-C10 be- comes ready to be connected with the PC. This is not a defect.

●At the factory, DHCP is set enabled for VN-C10.

●About the DHCP function

JVC does not recommend operating VN-C10 with this function enabled because a different IP address may be assigned upon the renewal of the leasing contract. The DHCP function of VN-C10 is designed for simplifying the installation and setting procedures.

Note

For connecting VN-C10 with the factory settings, either one of the environments described below is required.

●Environment where no DHCP server exists.

●Environment where a DHCP server exists, which clearly defines the allotted IP address and MAC address.

1.Select [Start], [Programs], [V.NETWORKS] and then [vn-c10u Setup Tool] to start up [V.Networks Setup Tool].

Enter the IP address of the camera to be connected to [Connection IP Address]. The IP address is set to 192.168.0.2 at the factory.

Click .

Note

Click [Search] to see the IP address of the connected camera.

The [V.Networks Search] screen is dis- played.

To start search, click [Search]. [V.Networks IP Address List] is dis- played.

●[TimeOut] is for setting the time for searching (0 to 30 seconds).

If no IP address is displayed by searching, change the value to a longer one and then search again.

●If [V.Networks] on LAN has a different subnet from that of the PC, connection cannot be established even if the IP address of the camera can be searched and found. Reconnect the camera after changing the IP address of the PC accordingly.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Networks Important Safeguards Safety Precautions Information for USAInformation for Europe Contents Introduction Preparations Operations V.Networks Controller Operations Web Browser OthersFeatures IntroductionItems Included Required Operating Environment PC Specifications LAN SpecificationsUpgrading the Application Introduction Operating Precautions Back-focus adjustment ring Lens mountBF Lock locking screw Bracket for camera mountingSide and rear views Preparations Connection Examples LAN ConnectionNetwork Connection Peer-to-Peer ConnectionSetting the Network Adjusting the CameraSetting with V.Networks Controller Operations with V.Networks ControllerPreparations Connection and Installation Attaching a LensPin Plug Power Cord For a system with multiple VN-C10sPush Cable Specifications Input RequirementsConnecting the Alarm I/O Terminals Output RequirementsSecuring wire Fall PreventionPreparations Setting the Network Installing V.Networks Setup ToolInstalling DirectX 8.1 and Codec Installing CodecClick Click in Local Area Connection Properties Select Settings and click Control Panel Click Page For other settings, next Start up V.Networks Controller.Refer to the relevant pages for these settings shown above 30 Page 32Following screen is displayed for confirmation Operation when alarm input is activated Other Settings with V.Networks Setup Tool 2. Alarm Setting AlarmRelay Alarm Alarm force outputPage Refresh Interval Motion Distinction IntervalAvailable Mask Reference ImageFrame Rate Others Recording timeRecording files Saving images of local recording to the PCPage Password Error Recovery Connection errorTransfer error Rec File FTPMulticast V.Networks Search screen is displayed Multi Address Search screen is displayedSearch result is displayed Page Start up V.Networks Setup Tool and select Web Start up V.Networks Setup Tool and select FTP Server NTP is used New is displayed Preparations Adjusting the Camera For a fixed-focus lensFor a zoom lens Operations Setting with V.Networks Controller File Setting ViewHelp Select File and then Motion Detect Standby Select the camera Select View Select Setting and Quality Setting the Image Quality Compression Rate DefaultWhite Balance Shutter SpeedPage When the settings are complete, click Operations Setting with V.Networks Controller Select Setting and Time Stamp Proceed with the setting Time StampSelect Setting and Property Proceed with the setting When complete, clickOperations Operations with V.Networks Controller Reduced screenCamera Click the REC button Moving image windowClick the Stop button Playback Click the Play buttonOperations Operations with V.Networks Controller Playback Click Playback is displayedOther Instructions on Record and Playback Record/Playback timeApproximate recording time for 2 GB MPEG4 data Click the SnapShot button Snap screen appearsSave As screen appears Other viewer softwareOperations Operations with a Web Browser PC must also satisfy the following Web browser conditionsUser Operator Administrator Security levelStart up the Web browser VN-C10 top page appearsSetting page is displayed Settings with a Web Browser 1. Other Settings Other SettingsOperations Operations with a Web Browser NTP Settings Adjust IntervalFile Name Http PortImage Quality Setting Window AutoGain Settings with a Web Browser 3. View Settings View Setting WindowClick Apply to update the settings Alarm Setting Window Alarm 1Alarm Out Relay Alarm SettingSettings with a Web Browser 5. FTP Settings FTP Client Setting WindowSettings with a Web Browser 5. FTP Settings Viewing Still Images Still ImageMoving Image VN-C10 Image Link Display in Java AppletDisplaying a Still Image Display in ServerpushTroubleshooting Symptoms Remedial ActionsOthers Others Specifications External DimensionsVN-C10 V.NETWORKS
Related manuals
Manual 78 pages 63.99 Kb

VN-C10 specifications

The JVC VN-C10 is a notable entry in the world of network cameras, designed for both professional and consumer use, emphasizing a blend of advanced technology and user-friendly features. It is well-regarded for its reliability and performance, making it a popular choice for security and surveillance applications.

One of the main features of the VN-C10 is its high-resolution imaging capability. With a resolution of up to 640 x 480 pixels, the camera delivers clear and detailed images, which are crucial for accurately monitoring environments. This camera is equipped with a 1/4-inch CCD sensor, known for its excellent light sensitivity. This enables the VN-C10 to produce high-quality video even in low-light conditions, making it versatile for various monitoring needs.

The VN-C10 employs advanced compression technologies to optimize streaming performance while conserving bandwidth. With support for both MPEG-4 and MJPEG compression methods, it allows users to choose the best setting for their specific requirements, balancing image quality with bandwidth usage. This flexibility is particularly important for installations with limited network capacity.

Another significant characteristic of the JVC VN-C10 is its PTZ capabilities, which stands for Pan-Tilt-Zoom. This functionality allows users to control the camera remotely, adjusting its viewing angles and zooming in on specific areas of interest. The ability to cover wide areas while focusing on details enhances the usability of the camera for surveillance tasks.

Integration is a key feature of the VN-C10, as it supports various network protocols including TCP/IP and HTTP. This ensures compatibility with a wide range of devices and software, making it easier to incorporate into existing security systems. Additionally, the camera is equipped with a built-in web server, allowing for straightforward access and configuration through standard web browsers.

In terms of physical characteristics, the JVC VN-C10 has a compact and durable design, which facilitates easy installation in diverse environments. Its robust build quality ensures longevity, while the camera's aesthetic design allows for discreet placement.

Overall, the JVC VN-C10 stands out for its combination of high-performance imaging, flexible streaming options, and user-friendly remote controls. It is an excellent choice for anyone looking to enhance their surveillance capabilities with a reliable and advanced network camera.
Top Page Image Contents