JVC VN-C10 manual Operations Operations with a Web Browser

Page 66

Operations (Step 6 Operations with a Web Browser)

6-4 Settings with a Web Browser (1. Other Settings) (continued)

Items in the [Other] screen

 

Item

Effect

 

 

 

DHCP

Sets whether to use DHCP.

IP Address

Changes to the address allotted or approved by the network

 

 

administrator. (This can be changed only when DHCP is not used.)

 

 

 

Subnet Mask

Sets the value provided or approved by the network adminis-

 

 

trator as in the case of IP address. (This can be changed only

 

 

when DHCP is not used.)

 

 

 

Default Gateway

Specifies the IP address for the default gateway. If the default

 

 

gateway is not to be used, enter Ò0.0.0.0Ó here. (This can be

 

 

changed only when DHCP is not used.)

 

 

 

Host Name

Maximum 8 alphanumerical characters can be entered. Specify

 

 

the host name when access link is established by a host name

 

 

in a DNS (Domain Name System) environment. The host name

 

 

is displayed on the title bar of each sub window.

 

 

Leave this field blank if the host name is unknown or unnecessary.

 

 

 

MAC Address

Unique physical address of the unit. Cannot be changed.

 

 

 

Program Version

The firmware version of VN-C10. Cannot be changed.

Password

Passwords for accessing VN-C10. Maximum 8 characters.

 

User Level

Enter the user password.

 

Operator Level

Enter the operator password.

 

Administrator Level

Enter the administrator password.

 

 

 

Cache Control

There are a few types of proxy server that caches CGI. With a

 

 

proxy server of this type, select [No Cache].

 

 

 

FTP Server Function

Select whether to enable or disable the FTP server function.With

 

 

this function enabled, user html pages, gif images, jpeg images,

 

 

etc. can be uploaded to VN-C10 using general FTP client software.

 

 

All uploaded files are stored directly under the [user] folder.

 

 

It can be accessed as in http://192.168.0.2/user/aaa.html with

 

 

a Web browser. (Ò192.168.0.2Ó denotes the VN-C10 IP address

 

 

when Òaaa.htmlÓ stored in the FTP server is referred to.)

 

 

The FTP server name is fixed to [Administrator]. Use the

 

 

administrater password.

 

 

 

Default Page

The VN-C10 top page is specified as the default page. If this func-

 

 

tion is enabled, the specified html file is used as the default page.

 

 

The default page is the one displayed when only IP address is speci-

 

 

fied.

 

 

Note

 

 

Even with this function enabled, if the specified html file

 

 

does not exist, the message, Ò404: Not foundÓ is displayed

 

 

when http://192.168.0.2/ is accessed. Ensure that the

 

 

appropriate file name is entered.

 

 

 

66

Page 65 Page 67
Image 66
Page 65 Page 67
Contents Networks Important Safeguards Safety Precautions Information for USAInformation for Europe Contents Introduction Preparations Operations V.Networks Controller Operations Web Browser OthersFeatures IntroductionItems Included Required Operating Environment PC Specifications LAN SpecificationsUpgrading the Application Introduction Operating Precautions BF Lock locking screw Back-focus adjustment ringLens mount Bracket for camera mountingSide and rear views Network Connection PreparationsConnection Examples LAN Connection Peer-to-Peer ConnectionSetting with V.Networks Controller Setting the NetworkAdjusting the Camera Operations with V.Networks ControllerPreparations Connection and Installation Attaching a LensPin Plug Power Cord For a system with multiple VN-C10sPush Cable Specifications Input RequirementsConnecting the Alarm I/O Terminals Output RequirementsSecuring wire Fall PreventionInstalling DirectX 8.1 and Codec Preparations Setting the NetworkInstalling V.Networks Setup Tool Installing CodecClick Click in Local Area Connection Properties Select Settings and click Control Panel Click Page For other settings, next Start up V.Networks Controller.Refer to the relevant pages for these settings shown above 30 Page 32Following screen is displayed for confirmation Operation when alarm input is activated Relay Alarm Other Settings with V.Networks Setup Tool 2. Alarm SettingAlarm Alarm force outputPage Available Mask Refresh IntervalMotion Distinction Interval Reference ImageFrame Rate Recording files OthersRecording time Saving images of local recording to the PCPage Transfer error PasswordError Recovery Connection error Rec File FTPMulticast V.Networks Search screen is displayed Multi Address Search screen is displayedSearch result is displayed Page Start up V.Networks Setup Tool and select Web Start up V.Networks Setup Tool and select FTP Server NTP is used New is displayed Preparations Adjusting the Camera For a fixed-focus lensFor a zoom lens Operations Setting with V.Networks Controller File Setting ViewHelp Select File and then Motion Detect Standby Select the camera Select View Select Setting and Quality White Balance Setting the Image Quality Compression RateDefault Shutter SpeedPage When the settings are complete, click Operations Setting with V.Networks Controller Select Setting and Time Stamp Proceed with the setting Time StampSelect Setting and Property Proceed with the setting When complete, clickOperations Operations with V.Networks Controller Reduced screenCamera Click the REC button Moving image windowClick the Stop button Playback Click the Play buttonOperations Operations with V.Networks Controller Playback Click Playback is displayedOther Instructions on Record and Playback Record/Playback timeApproximate recording time for 2 GB MPEG4 data Save As screen appears Click the SnapShot buttonSnap screen appears Other viewer softwareOperations Operations with a Web Browser PC must also satisfy the following Web browser conditionsUser Operator Administrator Security levelStart up the Web browser VN-C10 top page appearsSetting page is displayed Settings with a Web Browser 1. Other Settings Other SettingsOperations Operations with a Web Browser File Name NTP SettingsAdjust Interval Http PortImage Quality Setting Window AutoGain Settings with a Web Browser 3. View Settings View Setting WindowClick Apply to update the settings Alarm Out Alarm Setting WindowAlarm 1 Relay Alarm SettingSettings with a Web Browser 5. FTP Settings FTP Client Setting WindowSettings with a Web Browser 5. FTP Settings Viewing Still Images Still ImageMoving Image Displaying a Still Image VN-C10 Image LinkDisplay in Java Applet Display in ServerpushTroubleshooting Symptoms Remedial ActionsOthers Others Specifications External DimensionsVN-C10 V.NETWORKS
Related manuals
Manual 78 pages 63.99 Kb

VN-C10 specifications

The JVC VN-C10 is a notable entry in the world of network cameras, designed for both professional and consumer use, emphasizing a blend of advanced technology and user-friendly features. It is well-regarded for its reliability and performance, making it a popular choice for security and surveillance applications.

One of the main features of the VN-C10 is its high-resolution imaging capability. With a resolution of up to 640 x 480 pixels, the camera delivers clear and detailed images, which are crucial for accurately monitoring environments. This camera is equipped with a 1/4-inch CCD sensor, known for its excellent light sensitivity. This enables the VN-C10 to produce high-quality video even in low-light conditions, making it versatile for various monitoring needs.

The VN-C10 employs advanced compression technologies to optimize streaming performance while conserving bandwidth. With support for both MPEG-4 and MJPEG compression methods, it allows users to choose the best setting for their specific requirements, balancing image quality with bandwidth usage. This flexibility is particularly important for installations with limited network capacity.

Another significant characteristic of the JVC VN-C10 is its PTZ capabilities, which stands for Pan-Tilt-Zoom. This functionality allows users to control the camera remotely, adjusting its viewing angles and zooming in on specific areas of interest. The ability to cover wide areas while focusing on details enhances the usability of the camera for surveillance tasks.

Integration is a key feature of the VN-C10, as it supports various network protocols including TCP/IP and HTTP. This ensures compatibility with a wide range of devices and software, making it easier to incorporate into existing security systems. Additionally, the camera is equipped with a built-in web server, allowing for straightforward access and configuration through standard web browsers.

In terms of physical characteristics, the JVC VN-C10 has a compact and durable design, which facilitates easy installation in diverse environments. Its robust build quality ensures longevity, while the camera's aesthetic design allows for discreet placement.

Overall, the JVC VN-C10 stands out for its combination of high-performance imaging, flexible streaming options, and user-friendly remote controls. It is an excellent choice for anyone looking to enhance their surveillance capabilities with a reliable and advanced network camera.
Top Page Image Contents