JVC VN-C10 Other Settings with V.Networks Setup Tool 2. Alarm Setting, Motion Detection, List

Page 29

2-4 Other Settings with V.Networks Setup Tool [2. Alarm Setting] (continued)

1 Alarm 1

Select [ON] to convert signals input to the [ALARM INPUT 1] terminal to [Alarm 1] sig- nals.

If [Alarm Output] is selected, alarm signals are sent to the [ALARM OUTPUT] terminal ac- cording to the output port setting.

2 Alarm 2

Select [ON] to convert signals input to the [ALARM INPUT 2] terminal to [Alarm 2] sig- nals.

If [Alarm Output] is selected, alarm signals are sent to the [ALARM OUTPUT] terminal ac- cording to the output port setting.

3Motion Detection

Select [ON] for motion within the set area to be recognized as a cause for an alarm.

If [Alarm Output] is selected, alarm signals are sent to the [ALARM OUTPUT] terminal ac- cording to the output port setting.

4Relay Alarm

Select here to enable the alarm function, which is activated when two alarms are successively received within a certain period of time.

The sequence and interval of alarm input can be set.

If [Alarm Output] is selected, alarm signals are sent to the [ALARM OUTPUT] terminal ac- cording to the output port setting.

Note

¥A second alarm input enables this relay alarm function, and alarm will not be acti- vated for this second input.

¥Unless the alarm output is enabled, this function is not activated even if [Alarm Output] of the [Alarm Settings] screen is selected.

5Retry [1 to 3]

This function sets how many times an alarm alert to [V.Networks Controller] is repeated (1 to 3).

Note

Depending on the LAN environment, alarm alert might fail. If it fails, set the value to Ò3Ó. In such a case, alarm by [V.Networks Con- troller] itself is set off only once.

6Alarm force output

If [Output] is pressed, alarm signals are sent to the [ALARM OUTPUT] terminal. This forced output is used for checking the alarm func- tion.

7Out port setting

Enable this function to output alarm signals to the [ALARM OUTPUT] terminal.

Using output values, set the polarity, high or low, and output time (1 to 5000 ms) accord- ing to the equipment connected.

If initialization is set to start, the set alarm sig- nal is output once when the power is turned on.

8List

Press here to show the IP addresses of the PCs to which alarm input is reported. To de- lete an IP address, select the address and press [Delete].

Note

¥If more than 10 destinations are set, this function is not activated.

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents Networks Important Safeguards Information for Europe Safety PrecautionsInformation for USA Contents Introduction Preparations Others Operations V.Networks Controller Operations Web BrowserItems Included FeaturesIntroduction Upgrading the Application Required Operating Environment PC SpecificationsLAN Specifications Introduction Operating Precautions Lens mount Back-focus adjustment ringBF Lock locking screw Bracket for camera mountingSide and rear views Connection Examples LAN Connection PreparationsNetwork Connection Peer-to-Peer ConnectionAdjusting the Camera Setting the NetworkSetting with V.Networks Controller Operations with V.Networks ControllerPin Plug Preparations Connection and InstallationAttaching a Lens For a system with multiple VN-C10s Power CordPush Input Requirements Cable SpecificationsOutput Requirements Connecting the Alarm I/O TerminalsFall Prevention Securing wireInstalling V.Networks Setup Tool Preparations Setting the NetworkInstalling DirectX 8.1 and Codec Installing CodecClick Click in Local Area Connection Properties Select Settings and click Control Panel Click Page Start up V.Networks Controller. For other settings, next30 Page 32 Refer to the relevant pages for these settings shown aboveFollowing screen is displayed for confirmation Operation when alarm input is activated Alarm Other Settings with V.Networks Setup Tool 2. Alarm SettingRelay Alarm Alarm force outputPage Motion Distinction Interval Refresh IntervalAvailable Mask Reference ImageFrame Rate Recording time OthersRecording files Saving images of local recording to the PCPage Error Recovery Connection error PasswordTransfer error Rec File FTPMulticast Search result is displayed V.Networks Search screen is displayedMulti Address Search screen is displayed Page Start up V.Networks Setup Tool and select Web Start up V.Networks Setup Tool and select FTP Server NTP is used New is displayed For a zoom lens Preparations Adjusting the CameraFor a fixed-focus lens Operations Setting with V.Networks Controller Help File SettingView Select File and then Motion Detect Standby Select the camera Select View Select Setting and Quality Default Setting the Image Quality Compression RateWhite Balance Shutter SpeedPage When the settings are complete, click Operations Setting with V.Networks Controller Time Stamp Select Setting and Time Stamp Proceed with the settingWhen complete, click Select Setting and Property Proceed with the settingCamera Operations Operations with V.Networks ControllerReduced screen Click the Stop button Click the REC buttonMoving image window Click the Play button PlaybackPlayback Click Playback is displayed Operations Operations with V.Networks ControllerApproximate recording time for 2 GB MPEG4 data Other Instructions on Record and PlaybackRecord/Playback time Snap screen appears Click the SnapShot buttonSave As screen appears Other viewer softwarePC must also satisfy the following Web browser conditions Operations Operations with a Web BrowserSecurity level User Operator AdministratorVN-C10 top page appears Start up the Web browserSetting page is displayed Other Settings Settings with a Web Browser 1. Other SettingsOperations Operations with a Web Browser Adjust Interval NTP SettingsFile Name Http PortGain Image Quality Setting WindowAuto Click Apply to update the settings Settings with a Web Browser 3. View SettingsView Setting Window Alarm 1 Alarm Setting WindowAlarm Out Relay Alarm SettingFTP Client Setting Window Settings with a Web Browser 5. FTP SettingsSettings with a Web Browser 5. FTP Settings Still Image Viewing Still ImagesMoving Image Display in Java Applet VN-C10 Image LinkDisplaying a Still Image Display in ServerpushOthers TroubleshootingSymptoms Remedial Actions External Dimensions Others SpecificationsVN-C10 V.NETWORKS
Related manuals
Manual 78 pages 63.99 Kb

VN-C10 specifications

The JVC VN-C10 is a notable entry in the world of network cameras, designed for both professional and consumer use, emphasizing a blend of advanced technology and user-friendly features. It is well-regarded for its reliability and performance, making it a popular choice for security and surveillance applications.

One of the main features of the VN-C10 is its high-resolution imaging capability. With a resolution of up to 640 x 480 pixels, the camera delivers clear and detailed images, which are crucial for accurately monitoring environments. This camera is equipped with a 1/4-inch CCD sensor, known for its excellent light sensitivity. This enables the VN-C10 to produce high-quality video even in low-light conditions, making it versatile for various monitoring needs.

The VN-C10 employs advanced compression technologies to optimize streaming performance while conserving bandwidth. With support for both MPEG-4 and MJPEG compression methods, it allows users to choose the best setting for their specific requirements, balancing image quality with bandwidth usage. This flexibility is particularly important for installations with limited network capacity.

Another significant characteristic of the JVC VN-C10 is its PTZ capabilities, which stands for Pan-Tilt-Zoom. This functionality allows users to control the camera remotely, adjusting its viewing angles and zooming in on specific areas of interest. The ability to cover wide areas while focusing on details enhances the usability of the camera for surveillance tasks.

Integration is a key feature of the VN-C10, as it supports various network protocols including TCP/IP and HTTP. This ensures compatibility with a wide range of devices and software, making it easier to incorporate into existing security systems. Additionally, the camera is equipped with a built-in web server, allowing for straightforward access and configuration through standard web browsers.

In terms of physical characteristics, the JVC VN-C10 has a compact and durable design, which facilitates easy installation in diverse environments. Its robust build quality ensures longevity, while the camera's aesthetic design allows for discreet placement.

Overall, the JVC VN-C10 stands out for its combination of high-performance imaging, flexible streaming options, and user-friendly remote controls. It is an excellent choice for anyone looking to enhance their surveillance capabilities with a reliable and advanced network camera.
Top Page Image Contents