Invacare 1900S manual Removing/Installing the Safety Strap, Installing/Removing the Shoulder Strap

Page 15

SECTION 2—OPERATING THE BATH LIFT

Removing/Installing the Safety Strap

WARNING

DO NOT put the safety strap in the dryer. The high heat will melt the belt’s material.

NOTE: For this procedure, refer to FIGURE 2.10.

NOTE: The safety strap MUST be washed and disinfected after each use.

1.Unbuckle the safety strap by pulling up the hook‐and‐loop strip on the buckle.

2.Pull the hook‐and‐loop strip through the buckle (Detail “A”).

3.Remove the safety strap from the chair.

4.Repeat STEPS 1 to 3 for the other side.

5.Wrap the new safety strap around the lift frame.

6.Insert the hook‐and‐loop strip through the buckle and secure it to the chair frame (Detail “B”).

7.Repeat STEPS 5 and 6 for the other side.

Chair Frame

Buckle DETAIL “A”

Chair Frame

Buckle

DETAIL “B”

 

Safety Strap

Hook-and-Loop Strip

Safety Strap

Hook-and-Loop Strip

Installing/Removing the Shoulder Strap

NOTE: For this procedure, refer to FIGURE 2.11.

NOTE: To remove the shoulder strap, reverse this procedure.

1.Insert the belt through the bracket at the top of the chair.

2.Loop the hook‐and‐loop strip through the bracket and secure the strap.

Shoulder

Strap

Chair

Hook-

 

 

and-Loop

 

Strip

FIGURE 2.11 Installing/Removing the

Shoulder Strap

Part No. 1148113

15

1900/1900S Bath Lift

Image 15
Contents 1900/1900S Bath Lift Accessories Warning Table of Contents Meaning Special NotesLabel Location Bath Lift 1900/1900S Typical Product ParametersGeneral Guidelines Operating the LiftLifting/Transferring Performing Maintenance Electrical Grounding InstructionsPinch Points Transferring into/out of the Bathing Unit Operating the Bath LiftTransferring into/out of the Bathing Unit Using the Scale Model 1900S only Raising/Lowering the Bath LiftEmergency Stop Disinfecting the Lift Emergency LoweringDisinfecting the Lift Mounting the Battery ChargerMounting the Battery Charger Charging the BatteryInstalling/Removing the Shoulder Strap Removing/Installing the Safety Strap12 Using the Shoulder Strap Using the Shoulder StrapMaintenance and Troubleshooting Safety Inspection ChecklistsInspect/Adjust Initially and Monthly Care and Maintenance of Bath Lift Cleaning the LiftDetecting Wear and Damage Adjusting Arm Angle and Tension Maintenance ProceduresInspecting/Tightening the Seat Inspecting and Adjusting the Lift ColumnChanging the Scale Battery Model 1900S only Calibrate the 1900 Scale Calibrate the 1900 ScaleSymptoms Faults Solution TroubleshootingUSA Limited Warranty

1900S, 1900 specifications

Invacare is a leading manufacturer of medical equipment and aids for daily living, with the Invacare 1900 and 1900S being two notable models in their lineup of patient lifting solutions. Designed for efficiency and comfort, these models cater to the needs of both healthcare providers and patients.

One of the standout features of the Invacare 1900 series is its exceptional lifting capacity. With a solid construction, the 1900 model can support weights of up to 400 pounds, making it suitable for a wide range of individuals. The 1900S variant enhances this functionality with an innovative spreader bar, allowing for versatile positioning and improved comfort during lifts.

The 1900 series incorporates advanced technologies to facilitate safe and efficient patient transfers. The hydraulic lift system is operated manually via a foot pedal, enabling caregivers to operate the lifter without straining their back or arms. This design promotes ergonomic practices, reducing the risk of injury for caregivers while ensuring patients feel secure during the lift.

Another key characteristic of the Invacare 1900 and 1900S is their maneuverability. They are equipped with swivel casters that provide smooth movement in tight spaces, allowing caregivers to navigate through doorways and around furniture easily. The base of the lift is adjustable, offering the flexibility to accommodate various situations, whether lifting from a bed, wheelchair, or floor.

Both models feature a simple yet robust control mechanism that allows caregivers to operate the lift system effortlessly. The lifting arm can be adjusted to accommodate different patient heights, ensuring a customized and comfortable fit for each individual. Safety is paramount, and the Invacare 1900 series is designed with stability in mind, ensuring peace of mind during use.

Additionally, the durability of the materials used in the construction of the Invacare 1900 and 1900S ensures long-term reliability. These lifts are built to withstand the rigors of daily use in both home and healthcare settings, making them a wise investment.

In summary, the Invacare 1900 and 1900S patient lifts embody the perfect blend of functionality, safety, and ease of use. With their impressive lifting capabilities, advanced ergonomic design, and user-friendly features, they stand out as essential tools in the care of individuals with mobility challenges. These models not only improve the quality of life for patients but also support caregivers in providing safer, more efficient care.