Invacare 1900S manual Calibrate the 1900 Scale

Page 22

SECTION 3—MAINTENANCE AND TROUBLESHOOTING

Calibrate the 1900 Scale

NOTE: For this procedure, refer to FIGURE 3.5.

1.The resident MUST be removed from the bath lift to properly calibrate the scale. Refer to Transferring into/out of the Bathing Unit on page 9 for further instructions.

2.Turn the scale display power on by pressing the ON/OFF key.

NOTE: The scale display is attached to the side shroud with hook and loop material.

3.If necessary, pull the scale display away from the side shroud.

4.Insert the tip of a paper clip or similar tool into the small hole on the back of the scale display and press the CAL button.

NOTE: Once the CAL button is pushed, “CAL1” will be seen in the display window.

5.Press the UNITS key. The display reads CAL2.

6.Press the LOCK/UNLOCK key. The display reads UNLD.

7.Press the ZERO key. The display reads LOAD.

8.Put 200 pounds of weight on the seat of the bath lift.

9.Press the ZERO key. The display reads DONE.

10.Remove the weight. Press the LOCK/UNLOCK key.

NOTE: The scale is now in test mode.

11. Press the ZERO key. The display reads 0.00 lb. NOTE: The scale will now be in normal operation.

BACK VIEW OF SCALE DISPLAY

NOTE: Hook and loop material not shown.

CAL Button

FRONT VIEW OF SCALE DISPLAY

Display Window

FIGURE 3.5 Calibrate the 1900 Scale

1900/1900S Bath Lift

22

Part No. 1148113

Page 21 Page 23
Image 22
Page 21 Page 23
Contents 1900/1900S Bath Lift Accessories Warning Table of Contents Special Notes MeaningLabel Location Typical Product Parameters Bath Lift 1900/1900SOperating the Lift General GuidelinesLifting/Transferring Electrical Grounding Instructions Performing MaintenancePinch Points Operating the Bath Lift Transferring into/out of the Bathing UnitTransferring into/out of the Bathing Unit Raising/Lowering the Bath Lift Using the Scale Model 1900S onlyEmergency Stop Emergency Lowering Disinfecting the LiftMounting the Battery Charger Disinfecting the LiftCharging the Battery Mounting the Battery ChargerRemoving/Installing the Safety Strap Installing/Removing the Shoulder StrapUsing the Shoulder Strap 12 Using the Shoulder StrapSafety Inspection Checklists Maintenance and TroubleshootingInspect/Adjust Initially and Monthly Cleaning the Lift Care and Maintenance of Bath LiftDetecting Wear and Damage Maintenance Procedures Adjusting Arm Angle and TensionInspecting and Adjusting the Lift Column Inspecting/Tightening the SeatChanging the Scale Battery Model 1900S only Calibrate the 1900 Scale Calibrate the 1900 ScaleTroubleshooting Symptoms Faults SolutionLimited Warranty USA

1900S, 1900 specifications

Invacare is a leading manufacturer of medical equipment and aids for daily living, with the Invacare 1900 and 1900S being two notable models in their lineup of patient lifting solutions. Designed for efficiency and comfort, these models cater to the needs of both healthcare providers and patients.

One of the standout features of the Invacare 1900 series is its exceptional lifting capacity. With a solid construction, the 1900 model can support weights of up to 400 pounds, making it suitable for a wide range of individuals. The 1900S variant enhances this functionality with an innovative spreader bar, allowing for versatile positioning and improved comfort during lifts.

The 1900 series incorporates advanced technologies to facilitate safe and efficient patient transfers. The hydraulic lift system is operated manually via a foot pedal, enabling caregivers to operate the lifter without straining their back or arms. This design promotes ergonomic practices, reducing the risk of injury for caregivers while ensuring patients feel secure during the lift.

Another key characteristic of the Invacare 1900 and 1900S is their maneuverability. They are equipped with swivel casters that provide smooth movement in tight spaces, allowing caregivers to navigate through doorways and around furniture easily. The base of the lift is adjustable, offering the flexibility to accommodate various situations, whether lifting from a bed, wheelchair, or floor.

Both models feature a simple yet robust control mechanism that allows caregivers to operate the lift system effortlessly. The lifting arm can be adjusted to accommodate different patient heights, ensuring a customized and comfortable fit for each individual. Safety is paramount, and the Invacare 1900 series is designed with stability in mind, ensuring peace of mind during use.

Additionally, the durability of the materials used in the construction of the Invacare 1900 and 1900S ensures long-term reliability. These lifts are built to withstand the rigors of daily use in both home and healthcare settings, making them a wise investment.

In summary, the Invacare 1900 and 1900S patient lifts embody the perfect blend of functionality, safety, and ease of use. With their impressive lifting capabilities, advanced ergonomic design, and user-friendly features, they stand out as essential tools in the care of individuals with mobility challenges. These models not only improve the quality of life for patients but also support caregivers in providing safer, more efficient care.
Top Page Image Contents