How To Use
| Mist Selection Dial |
Power/Mist Knob | Night Light ON/OFF |
Button |
How to Fill
CAUTION: Before filling unit with water, turn power off and unplug unit from the outlet.
Note: Always use two hands to carry the water tank.
1. Grasp tank handle and lift up from humidifier base.
Fig. 3
Night Light
Illuminated Ring
Fig. 2
Power/Mist Knob
Plug unit into a 120 volt AC electrical outlet. Turn the POWER/MIST ( 
) knob clockwise to turn the humidifier on.
ATTENTION: When the water in the tank is almost empty, the humidifying function will power off to indicate to the user to refill the tank.
Mist Adjustment Setting
Mist adjusts from MINIMUM ( 
) mist to MAXIMUM ( 
) mist. To increase the mist output, turn the POWER/MIST knob clockwise. To decrease mist output, turn the POWER/MIST knob
Night Light
Press the NIGHT LIGHT ( 
) button to turn on the night light. The surround around the POWER/MIST knob will glow softly.
Fig. 4 
Fig. 5 |
Fig. 6 
2.Turn the tank upside
3.Fill the water tank with clean, cool (not cold) water. We recommend using distilled water if you live in a hard water area.
4.Replace the tank cap by turning clockwise until tight.
5.Install the tank back on the base of the unit. Make sure the tank is firmly seated.
6
Fig. 7
7