Compaq LaserJet 4610n manual SET Registration Print Test Source Adjust Tray N

Menu item	Values
SET REGISTRATION	PRINT TEST PAGE
	SOURCE
	ADJUST TRAY [N]

Description

Allows simplex and duplex image alignment.

Shifts the margin alignment to center the image on the page from top to bottom, and left to right. You can also align the image that is printed on the front with the image that is printed on the back.

PRINT TEST PAGE: Prints a test page that shows the current registration settings.

SOURCE: Allows you to select the tray for which you want to print the test page. If installed, optional trays appear as selections, where [N] is the number of the tray.

ADJUST TRAY [N]: Sets the registration for the specified tray, where [N] is the number of the tray. A selection appears for each tray that is installed, and registration must be set for each tray.

●X1 SHIFT: Registration of the image on the paper from side to side, as the paper lies in the tray. For duplexing, this side is the second side (back) of the paper.

●X2 SHIFT: Registration of the image on the paper from side to side, as the paper lies in the tray, for the first side (front) of a duplexed page. This item appears only if an optional duplexer is installed and enabled. Set the X1 SHIFT first.

●Y SHIFT: Registration of the image on the paper from top to bottom as the paper lies in the tray.

The default for the SOURCE is TRAY 2. The default for the sub-items ADJUST TRAY 1 and ADJUST TRAY 2 is 0.

ENWW Configure device menu 39