Compaq LaserJet 4610n manual Remove ALL Print Cartridges, Replace Color Cartridge

Control panel messages (continued)

Control panel message

REMOVE ALL PRINT CARTRIDGES

To exit press STOP KEY

Description	Recommended action
The printer is executing a Component	Remove all print cartridges.
Test and the component selected is Belt
Only.

Remove at least one print cartridge.

To exit press STOP KEY

REPLACE <COLOR>

CARTRIDGE

The supplies gauge will display the consumption levels of print cartridges.

alternates with

For help press

The supplies gauge will display the consumption levels of print cartridges.

The printer is executing a Disable Cartridge Check or Component Test where the component selected is Cartridge Motor.

The identified print cartridge has reached the end of life and the COLOR SUPPLY OUT setting in SYSTEM SETUP is set to STOP. Printing will not continue until the cartridge is replaced.

Remove one print cartridge.

1.Open the top cover and image transfer unit.

CAUTION

The image transfer unit can be easily damaged.

2.Remove the identified print cartridge.

3.Install a new print cartridge.

4.Close the top and front covers.

REPLACE <COLOR>

CARTRIDGE

The supplies gauge will display the consumption levels of print cartridges.

alternates with

To continue press

The supplies gauge will display the consumption levels of print cartridges.

The identified print cartridge is nearing the end of its useful life and the SUPPLIES LOW setting in SYSTEM SETUP is set to STOP.

1.Order the identified print cartridge.

2.To continue printing, press .

3.To replace the cartridge, perform the following steps:

●Open the top cover and image transfer unit.

CAUTION

The image transfer unit can be easily damaged.

●Remove the identified print cartridge.

●Install a new print cartridge.

●Close the top and front covers.

148 Chapter 8 Problem solving ENWW