The printer comes with printing system software and printer drivers on a CD-ROM. The

 

printing system software on the CD-ROM must be installed to take full advantage of the

 

printer features.

 

If you do not have access to a CD-ROM drive, you can download the printing system

 

software from the Internet at http://www.hp.com/go/clj4610_software.

 

Sample model scripts for UNIX® (HP-UX®, Sun Solaris) and Linux networks are available

NOTE

 

for download at http://www.hp.com/go/clj4610_software.

 

You can download the latest software free of charge at http://www.hp.com/go/

 

clj4610_software.

Installing Windows printing system software for direct connections

This section explains how to install the printing system software for Microsoft Windows 2000 and Windows XP.

When installing the printing software in a direct-connect environment, always install the software before connecting the parallel or USB cable. If the parallel or USB cable was connected before the software installation, see Installing the software after the parallel or USB cable has been connected.

Either a parallel or USB cable can be used for the direct connection. However, you cannot connect parallel and USB cables at the same time. Use an IEEE 1284-compatible cable or a standard 2-meter USB cable.

To install the printing system software

1.Close all software programs that are open or running.

2.Insert the printer CD-ROM into the CD-ROM drive.

If the welcome screen does not open, start it by using the following procedure:

On the Start menu, click Run.

Type the following: X:\setup (where X is the letter of the CD-ROM drive).

Click OK.

3.When prompted, click Install Printer and follow the instructions on the computer screen.

4.Click Finish when the installation has completed.

5.You might need to restart the computer.

6.Print a Test Page or a page from any software program to make sure that the software is correctly installed.

If installation fails, reinstall the software. If this fails, check the installation notes and readme files on the printer CD-ROM or the flyer that came in the printer box, or go to http://www.hp.com/support/clj4610 for help or more information.

Installing Windows printing system software for networks

The software on the printer CD-ROM supports network installation with a Microsoft network. For network installation on other operating systems, go to http://www.hp.com/support/clj4610.

ENWW

Printer software 13

Page 25
Image 25
Compaq LaserJet 4610n Installing Windows printing system software for networks, To install the printing system software