Clearing jams

Each section below corresponds with a jam message that might appear on the control panel. Use these procedures to clear the jam.

Jam in Tray 1

1. Open Tray 1.

 

2.

Remove any jammed paper from Tray 1.

 

3.

Reload paper in Tray 1 and check to make sure the media is located correctly.

 

Do not load media above the fill tabs.

NOTE

 

4.

Confirm that the guides are in the correct position.

5.Close Tray 1.

6.To continue printing, press , and then press .

162 Chapter 8 Problem solving

ENWW

Page 174
Image 174
Compaq LaserJet 4610n manual Clearing jams, Jam in Tray