Compaq LaserJet 4610n PowerSave Time, To set manually feed prompt

To set manually feed prompt

1.	Press	MENU to enter the MENUS.
2.	Press	to highlight CONFIGURE DEVICE.
3.	Press	to select CONFIGURE DEVICE.
4.	Press	to highlight SYSTEM SETUP.
5.	Press	to select SYSTEM SETUP.
6.	Press	to highlight TRAY BEHAVIOR.
7.	Press	to select TRAY BEHAVIOR.
8.	Press	to highlight MANUALLY FEED PROMPT.
9.	Press	to select MANUALLY FEED PROMPT.
10. Press		or to select ALWAYS or UNLESS LOADED.
11. Press		to set the behavior.
12. Press		MENU.

To set the printer default for PS Defer Media

1.	Press MENU to enter the MENUS.
2.	Press	to highlight CONFIGURE DEVICE.
3.	Press	to select CONFIGURE DEVICE.
4.	Press	to highlight SYSTEM SETUP.
5.	Press	to select SYSTEM SETUP.
6.	Press	to highlight TRAY BEHAVIOR.
7.	Press	to select TRAY BEHAVIOR.
8.	Press	to select PS DEFER MEDIA.
9.	Press or select ENABLED or Disabled.
10.	Press	to set the behavior.
11.	Press MENU.

	PowerSave Time
	The adjustable PowerSave Time feature reduces power consumption when the printer has
	been inactive for an extended period. You can set the length of time before the printer goes
	into PowerSave mode to 1 MINUTE, 15 MINUTES, 30 MINUTES, 60 MINUTES, 90
	MINUTES, 2 HOURS, or to 4 HOURS. The default setting is 30 MINUTES.
	The printer display dims when the printer is in PowerSave mode. PowerSave mode does not
NOTE
	affect printer warm-up time.

52 Chapter 2 Control panel ENWW