Compaq LaserJet 4610n manual Size Mismatch Tray XX=SIZE, Tray X Empty Type Size, Tray X Open

Control panel messages (continued)

Control panel message

SIZE MISMATCH

TRAY XX=[SIZE]

For help press

alternates with

Ready

Tray X [TYPE] [SIZE]

Size detected by tray

alternates with

Tray X [TYPE] [SIZE]

To change size or type press

Tray X [TYPE] [SIZE]

Size specified by user

alternates with

TRAY XX [TYPE] [SIZE] To change size or type press

TRAY X EMPTY [TYPE] [SIZE]

alternates with

Ready

TRAY X OPEN

For help press

alternates with

Ready

Description

The tray is loaded with media longer or shorter in the feed direction than the size configured for the tray.

The printer is reporting the current configuration of tray X. The tray switch is in the STANDARD position.

The printer is reporting the current configuration of tray X. The tray switch is in the CUSTOM position.

The specified tray is empty and the current job does not currently need this tray to print.

The specified tray is open or not closed completely.

Recommended action

1.Adjust the side and rear media guides against the paper.

2.If the media used is letter, A4, executive, JIS B5, A5, or legal, the tray switch should be set to STANDARD. Set the tray switch to CUSTOM for all other media sizes. The tray switch must be set before the size can be selected from the control panel.

3.If necessary, press after the tray is closed to reset the paper size or type.

1.If the configuration of the size and

type is correct, press to clear the message.

2.To change media size or type, press

.

Use and to highlight the size or type, and then press to select.

3.If action is required to change the size, a message with instructions will appear after the selection is attempted.

1.If the configuration of the size and type is correct, press to clear the message.

2.To change media size or type, press

.

Use and to highlight the size or type, and then press to select.

3.If action is required to change the size, a message with instructions will appear after the selection is attempted.

4.See Configuring input trays for more details.

Refill the tray at a convenient time.

Close the tray.

ENWW Control panel messages 155