Compaq LaserJet 4610n manual Storage Full, 8X.YYYY EIO X Error, Menus Locked

Control panel messages (continued)

Control panel message 68.X PERMANENT

STORAGE FULL

For help press

alternates with

68.X PERMANENT STORAGE FULL To continue press

Description

A non-volatile storage device is full. Pressing the button should clear the message. Printing can continue, but there may be unexpected behavior.

X Description

0 for onboard NVRAM

1 for removable disk (flash or hard)

Recommended action

1.Press to continue.

2.For 68.0 errors, turn the printer off and then back on.

3.If a 68.0 error persists, contact HP Support.

4.For 68.1 errors, use the HP Web Jetadmin software to delete files from the disk drive.

5.For 68.1 errors that persist, contact HP Support.

68.X PERMANENT STORAGE WRITE FAIL To continue press

68.X STORAGE ERROR SETTINGS CHANGED For help press

alternates with

68.X STORAGE ERROR SETTINGS CHANGED To continue press

A non-volatile storage device is full. Pressing the button should clear the message. Printing can continue, but there may be unexpected behavior.

X Description

0 for onboard NVRAM

1 for removable disk (flash or hard)

One or more printer settings saved in the non-volatile storage device is invalid and has been reset to its factory default.

Pressing the button should clear the message. Printing can continue, but there may be unexpected behavior.

1.Press to continue.

2.If the message persists, turn the printer off and then back on.

3.If the problem persists, contact HP Support at http://www.hp.com/ support/clj4610.

1.Press to continue.

2.If the message persists, turn the printer off and then back on.

3.If the problem persists, contact HP Support at http://www.hp.com/ support/clj4610.

79.XXXX

PRINTER ERROR To continue turn off then on

A critical hardware error has occurred.	1.	Turn the printer off and then back on.
	2.	If the problem persists, contact
		HP Support at http://www.hp.com/
		support/clj4610.

8X.YYYY

EIO X ERROR

Access Denied

MENUS LOCKED

Calibrating...

The EIO accessory card in slot X has encountered a critical error.

X Description

1:error in slot 1

2:error in slot 2

An attempt has been made to modify a menu item while the control panel security mechanism is enabled by the printer administrator. The message will disappear shortly, and the printer will return to Ready or BUSY state.

The printer is calibrating.

1.Turn the printer off and then back on.

2.If the problem persists, contact HP Support at http://www.hp.com/ support/clj4610.

Contact the printer administrator to change settings.

No action necessary.

138 Chapter 8 Problem solving ENWW