Compaq LaserJet 4610n manual Paper Path Test menu, Selecting Print Test

Menu item	Description
PAPER PATH TEST	Generates a test page that is
	useful for testing the paper-
	handling features of the printer.
	Press (SELECT button) to start
	the paper-path test using the
	source (tray), destination
	(output bin), duplex, and
	number of copies settings that
	you set in the other items on
	the PAPER PATH TEST menu.
	Set the other items before
	selecting PRINT TEST PAGE.
	SOURCE: Select the tray that
	uses the paper path that you
	want to test. You can select
	any tray that is installed. Select
	ALL TRAYS to test all tray
	paper paths. Paper must be
	loaded in the selected trays.
	DESTINATION: Select the
	output bin that uses the paper
	path that you want to test. You
	can select any output bin that is
	installed. Optional bins (stacker
	or stapler/stacker bin) must
	also be correctly configured in
	the printer driver. Select ALL
	BINS to test all paper paths.
	COPIES: Set how many sheets
	of paper are used from each
	tray during the paper-path test.
	If you are testing the optional
	stapler/stacker (DESTINATION
	item), select 10 or more sheets.
MANUAL SENSOR TEST	This item performs a test to
	determine whether the paper
	path sensors are operating
	correctly.
COMPONENT TEST	This item will activate individual
	parts independently to isolate
	noise, leaking, and other
	hardware issues.
PRINT/STOP TEST	This item isolates print quality
	faults more accurately by
	stopping the printer in mid-print
	cycle. Stopping the printer in
	mid-print cycle allows you to
	see where the image begins to
	degrade. Stopping the printer in
	mid-print cycle will cause a jam
	that may need to be manually
	removed. A service
	representative should perform
	this test.

ENWW Diagnostics menu 47