Compaq LaserJet 4610n manual Replace Supplies, Using black only

Control panel messages (continued)

Control panel message

REPLACE SUPPLIES

For status press

The supplies gauge will display the consumption levels of print cartridges.

Description

Multiple supplies are at the end of their useful life. If the supplies affected are cartridges only, printing has stopped because the COLOR SUPPLY OUT setting in SYSTEM SETUP is set to STOP. If the fuser or transfer kit is affected, then printing always stops.

Recommended action

1.Press to access the SUPPLIES STATUS menu.

2.Press and to highlight the specific supply that has a problem.

3.Press to view help for the supply.

4.Press and to step through the instructions.

REPLACE SUPPLIES

To continue press

The supplies gauge will display the consumption levels of print cartridges.

REPLACE SUPPLIES

Using black only

The supplies gauge will display the consumption levels of print cartridges.

alternates with

Ready

For help press

The supplies gauge will display the consumption levels of print cartridges.

Multiple supplies are at the end of their useful life and the SUPPLIES LOW setting in SYSTEM SETUP is set to STOP.

At least one color cartridge is at the end of its useful life and the COLOR SUPPLY OUT setting in SYSTEM SETUP is set to AUTOCONTINUE BLACK. Printing will continue using black toner only.

1.Press to access the SUPPLIES STATUS menu.

2.Press and to highlight the specific supply that has a problem.

3.Press to view help for the supply.

4.Press and to step through the instructions.

Press to identify which supplies should be replaced. Replace identified supplies to continue printing in color.

ENWW Control panel messages 151