Compaq LaserJet 4610n manual Font List, Menu MAP, Registration

Control panel messages (continued)

Control panel message

Printing...

FONT LIST

Description	Recommended action
The printer is generating either the PCL	No action necessary.
or PS personality typeface list. The
printer will return to the Ready state
when the page is completed.

Printing...

MENU MAP

Printing...

PQ TROUBLESHOOTING

The printer is generating the printer	No action necessary.
menu map. The printer will return to the
Ready state when the page is completed.
The printer is generating the print quality	Follow the instructions on the printed
troubleshooting pages. The printer will	pages.
return to the Ready state when the
pages are printed.

Printing...

REGISTRATION PAGE

Printing...

RGB Samples

Printing...

SUPPLIES STATUS

The printer is generating the registration page. The printer will return to the SET REGISTRATION menu when the page is completed.

This message displays while the printer RGB samples page is being generated.

The printer is generating the supplies status page. The printer will return to the online Ready state when the page is completed.

Follow the instructions on the printed pages.

No action necessary.

No action necessary.

Printing...

Usage Page

Processing...

The printer is generating the usage	No action necessary.
page. The printer will return to the online
Ready state when the page is completed.
The printer is currently processing a job	No action necessary.
but is not yet picking pages. When paper
motion begins, this message will be
replaced by a message that indicates
which tray the job is being printed from.

Processing...

copy <X> of <Y>

Processing...

from tray xx

Ready

The supplies gauge will display the consumption levels of print cartridges.

Ready

Diagnostics mode

To exit press STOP KEY

Receiving upgrade

The printer is currently processing or printing collated copies. The message indicates that copy X of Y total copies is currently being processed.

The printer is actively processing a job from the designated tray.

The printer is online and ready for data. No status or device attendance messages are pending at the display.

The printer is in a special diagnostics mode.

A firmware upgrade is in progress.

No action necessary.

No action necessary.

No action necessary.

Press the STOP key to exit the special diagnostics mode.

OR

No action is necessary.

Do not turn the printer off until the printer returns to Ready.

ENWW Control panel messages 147