Compaq LaserJet 4610n Changing printer control panel configuration settings, Job storage limit

Changing printer control panel configuration settings

	By using the printer control panel, you can make changes to general printer configuration
	default settings such as tray size and type, PowerSave time, printer personality (language),
	and jam recovery.
	Configuration settings seldom need to be changed. Hewlett-Packard recommends that only
CAUTION
	the system administrator change configuration settings.

NOTE

Job storage limit

This option sets the limit for the maximum number of jobs stored on the printer memory at the printer.

You must have additional memory installed in the printer to use the job storage feature. The memory that comes standard with the printer is not sufficient to support the job storage feature.

To set the job storage limit

1.Press MENU to enter the MENUS.

2.Press to highlight CONFIGURE DEVICE.

3.Press to select CONFIGURE DEVICE.

4.Press to highlight SYSTEM SETUP.

5.Press to select SYSTEM SETUP.

6.Press to select JOB STORAGE LIMIT.

7.Press or to change the value.

8.Press to set the value.

9.Press MENU.

Job held timeout

This option sets the period of time that the system keeps files in job storage before deleting them from the queue. The default setting for this option is OFF; the other available settings are 1 HOUR, 4 HOURS, 1 DAY, and 1 WEEK.

ENWW Changing printer control panel configuration settings 49