Compaq LaserJet 4610n manual Card Slot X not, Functional, Chosen Personality not Available

Control panel messages (continued)

Control panel message	Description	Recommended action
Canceling...	The printer is in the process of canceling	No action necessary.
	a job. The message will continue to be
	displayed while the job is stopped, the
	paper path flushed, and any remaining
	incoming data on the active data
	channel is received and discarded.

CARD SLOT X NOT	The flash card in slot X is not working
FUNCTIONAL	correctly.

1.Turn the printer off.

2.Remove the card from the slot indicated and replace with a new card.

Checking paper path

The engine is turning its rollers to check	No action necessary.
for possible paper jams.

Checking printer

CHOSEN PERSONALITY NOT AVAILABLE

To continue press

alternates with

CHOSEN PERSONALITY NOT AVAILABLE

For help press

Clearing event log

The engine is doing an internal test.

PJL encountered a request for a personality that did not exist in the printer. The job is aborted and no pages will be printed.

This message is displayed while the event log is cleared. The printer will exit the MENUS once the event log has been cleared.

No action necessary.

1.Press for detailed information.

2.Press and to step through the instructions.

3.Reprint using the correct driver for the device.

No action necessary.

Clearing paper path

The printer jammed or detected	No action necessary.
misplaced paper when turned on. The
printer is attempting to eject jammed
pages automatically.

CLOSE FRONT COVERS For help press

DATA RECEIVED

To print last page press

alternates with

Ready

To print last page press

Deleting...

The covers need to be closed.

The printer received data and is waiting for a form feed. When the printer receives another file, the message should disappear.

The printer is currently deleting the stored job.

Close front covers.

NOTE

This message might also appear if the fuser is missing or incorrectly installed. Ensure that the fuser is correctly installed.

Press to continue printing.

No action necessary.

ENWW Control panel messages 139