Compaq LaserJet 4610n manual Replacing supplies, Locating supplies, Supply replacement guidelines

Replacing supplies

When you use genuine HP supplies, the printer automatically notifies you when supplies are nearly depleted. The notification to order supplies allows ample time to order new supplies before they need to be replaced.

Locating supplies

Supplies are identified by their labeling and their blue plastic handles.

The following figure illustrates the location of each supply item.

Supply item locations

1fuser

2print cartridges

3transfer unit

Supply replacement guidelines

To facilitate the replacement of supplies, keep the following guidelines in mind when setting up the printer.

●Sufficient space is required above and in the front of the printer for removing supplies.

●The printer should be located on a flat, sturdy surface.

For instructions on installing supplies, see the installation guides provided with each supply item or see more information at http://www.hp.com/support/clj4610. When you connect, select Solve a Problem.

CAUTION	Hewlett-Packard recommends the use of genuine HP products in this printer. Use of non-HP
	products may cause problems requiring service that is not covered by the Hewlett-Packard
	warranty or service agreements.

Making room around the printer for replacing supplies

The following illustration shows the clearance necessary in front of, above, and to the side of the printer for replacing supplies.

120 Chapter 7 Maintenance ENWW