Compaq LaserJet 4610n manual XX Printer Error

Control panel messages (continued)

Control panel message 53.XY.ZZ CHECK RAM DIMM SLOT X

54.X PRINTER ERROR

To continue turn off then on

Description

An error occurred on some memory of the printer.

Values of X, Y, and ZZ are:

X Device Location

1 Slot 1

2 Slot 2

Y Bank Number

1 Bank number 1

2 Bank number 2

3 Bank number 3

4 Bank number 4

ZZ Error Number

01 Unsupported memory

02 Unrecognized memory

03 Under minimum memory limit

04 Exceeded maximum memory limit

05 Failed RAM test

Printing cannot continue. There is a toner remaining sensor malfunction.

Values of X are:

15 - Yellow

16 - Magenta

17 - Cyan

18 - Black

Recommended action

If prompted to do so, press to continue. The printer should come to the Ready state, but will not make full use of all memory installed.

Otherwise:

1.Turn the printer off.

2.Verify that all DDR SDRAM meets specifications and is correctly seated.

3.Turn the printer on.

4.If the problem persists, contact HP Support at http://www.hp.com/ support/clj4610.

1.Turn the printer off and then back on.

2.If the problem persists, contact HP Support at http://www.hp.com/ support/clj4610.

54.XX PRINTER ERROR

To continue turn off then on

55.0X.YY DC CONTROLLER ERROR For help press

alternates with

55.0X.YY

PRINTER ERROR

To continue

turn off then on

01 - Printing cannot continue. The humidity environmental sensor is abnormal.

02 – Rotary motor abnormality.

05 – OHT sensor/media sensor.

06 – Density sensor.

A printer command error has occurred. X Description

00 – Communication error

01 – DC controller memory error

02 – Outgoing parity error

03 – No engine response

04 – Communication timeout

1.Turn the printer off and then back on.

2.If the problem persists, contact HP Support at http://www.hp.com/ support/clj4610.

1.Turn the printer off and then back on.

2.If the problem persists, contact HP Support at http://www.hp.com/ support/clj4610.

ENWW Control panel messages 135