Compaq LaserJet 4610n manual NON HP Supply USE, Order Color Cartridge, Order Supplies

Control panel messages (continued)

Control panel message

NON HP SUPPLY

IN USE

alternates with

Ready

The supplies gauge will display the consumption levels of print cartridges, but the level of any refilled cartridge will not be shown.

Description

The printer has detected that a non-HP print cartridge is currently installed.

Recommended action

If you believe you purchased an HP cartridge, please call the HP fraud hotline.

CAUTION

Any printer repair required as a result of using non-HP cartridges is not covered under HP warranty.

ORDER <COLOR>

CARTRIDGE

The supplies gauge will display the consumption levels of print cartridges.

alternates with

Ready

The supplies gauge will display the consumption levels of print cartridges.

ORDER FUSER KIT

LESS THAN XXX PAGES

For help press

alternates with

Ready

ORDER SUPPLIES

alternates with

Ready

For help press

The supplies gauge will display the consumption levels of print cartridges.

The identified print cartridge is nearing the end of its useful life. The printer is ready and will continue for the estimated number of pages indicated. Estimated pages remaining is based upon the historical page coverage of this printer.

Printing will continue until a supply needs to be replaced.

The fuser is near end of life. The printer is ready and will continue for the estimated number of pages indicated.

Printing will continue until a supply needs to be replaced.

More than one supply item is low.

Printing will continue until a supply needs to be replaced.

1.Press to view help for the message.

2.Obtain the part number for the print cartridge indicated.

3.Order a print cartridge

1.Press to view help for the message.

2.Obtain the part number for the fuser kit.

3.Order the fuser kit.

1.Press MENU to access the menus.

2.Press or to highlight INFORMATION, and then press .

3.Press or to highlight SUPPLIES STATUS, and then press .

4.Press or to highlight a supply that needs to be ordered.

5.Press to access help for the supply.

6.Obtain a part number from help.

7.Order the supply.

8.Repeat the previous steps as necessary for each supply that needs to be ordered.

ENWW Control panel messages 145