Compaq LaserJet 4610n manual Load Tray Type Size, Printer Error, Xxxx

Control panel messages (continued)

Control panel message

41.3UNEXPECTED SIZE IN TRAY X For help press

alternates with

LOAD TRAY XX [TYPE] [SIZE] To use another tray press

41.5UNEXPECTED TYPE IN TRAY X For help press

alternates with

LOAD TRAY XX

[TYPE] [SIZE]

To use another

tray press

41.X

PRINTER ERROR

For help press

alternates with

41.X

PRINTER ERROR To continue press

49.XXXX

PRINTER ERROR To continue turn off then on

Description

Media is loaded that is longer or shorter in the feed direction than the size configured for the tray.

The printer senses a different media type in the media path than configured in the tray.

A printer error has occurred.

X Description

1.Unknown misprint error

2.Beam detect misprint error

3.Media feed error (type)

4.No VSYNC error

5.Media feed error (type)

6.ETB detection error

7.Feed delay error

9. Noise VSREQ error

A critical firmware error has occurred.

Recommended action

1.If the incorrect size was selected, cancel the job or press to access help.

OR

2.Press to select another tray.

3.Press and to step through the instructions.

1.If the incorrect size was selected, cancel the job or press to access help.

OR

2.Press to select another tray.

3.Press and to step through the instructions.

1.Press to continue or press for more information.

2.If the message persists, turn the printer off and then back on.

3.If the message still persists, contact HP Support at http://www.hp.com/ support/clj4610.

1.Turn the printer off and then back on.

2.If the message persists, contact HP Support at http://www.hp.com/ support/clj4610.

ENWW Control panel messages 133