Compaq LaserJet 4610n manual Load Tray XX Type Size, Move tray switch to Custom

Control panel messages (continued)

Control panel message

LOAD TRAY XX

[TYPE] [SIZE]

For help press

alternates with

LOAD TRAY XX [TYPE] [SIZE]

To use another tray press

LOAD TRAY XX [TYPE] [SIZE]

Move tray switch to CUSTOM.

alternates with

LOAD TRAY XX [TYPE] [SIZE] For help press

LOAD TRAY XX [TYPE] [SIZE]

Move tray switch to CUSTOM.

alternates with

LOAD TRAY XX [TYPE] [SIZE]

To use another tray press

LOAD TRAY XX [TYPE] [SIZE]

Recommend move tray switch to STANDARD. Then close tray

alternates with

LOAD TRAY XX [TYPE] [SIZE] For help press

LOAD TRAY XX [TYPE] [SIZE]

Recommend move tray switch to STANDARD. Then close tray

alternates with

LOAD TRAY XX [TYPE] [SIZE]

To use another tray press

Description

Tray XX is either empty or configured for a type and size other than specified in the job.

Tray XX is either empty or configured for a type and size other than specified in the job. Tray XX is either empty or configured for a type and size other than specified in the job. The size specified in the job requires that the tray switch be in the custom position.

No other tray is available.

Tray XX is either empty or configured for a type and size other than specified in the job. The size specified in the job requires that the tray switch be in the custom position.

Tray XX is either empty or configured for a type and size other than specified in the job. The size specified in the job is a detectable size.

No other tray is available.

Tray XX is either empty or configured for a type and size other than specified in the job. The size specified in the job is a detectable size.

Recommended action

1.Load the paper tray with the specified media.

2.Confirm that the media guides are in the correct position.

3.Verify that the tray switch is in the correct position.

4.To use another tray, press .

1.Load the paper tray with the specified media.

2.Confirm that the media guides are in the correct position.

3.Verify that the tray switch is in the custom position.

1.Load the paper tray with the specified media.

2.Confirm that the media guides are in the correct position.

3.Verify that the tray switch is in the custom position.

4.To use another tray, press .

1.Load the paper tray with the specified media.

2.Confirm that the media guides are in the correct position.

3.Verify that the tray switch is in the STANDARD position so the printer will automatically detect the size.

1.Load the paper tray with the specified media.

2.Confirm that the media guides are in the correct position.

3.Verify that the tray switch is in the STANDARD position so the printer will automatically detect the size.

ENWW Control panel messages 143