Wiring5 the fan, Operating the ceiling fan

wiring5 the fan

Attach the fan wires to the ceiling fixture outlet box wiring by placing the bare ends of the wires together and then securing with a wire nut. Test that the connection is secure by pulling on the wire nut. Connect as follows:

•GREEN leads from mounting plate and fan to GROUND conductor of power source. Secure with wire nut.

•WHITE wire from fan to white NEUTRAL wire in ceiling fixture outlet box. Secure with wire nut.

•BLUE wire and BLACK power wire from fan to BLACK power wire in ceiling outlet box. Secure with wire nut.

WARNING: Be sure no bare wires or wire strands are visible after making connections

removing7 the shipping blocks

On the motor, remove the five shipping blocks by unscrewing the screws. Set these screws aside for installing the blades.

Discard the five shipping blocks.

Shipping Blocks

operating the ceiling fan

1. Turn on the electrical power to the fan.

2. The fan pull chain controls the power to the fan. The pull chain has four settings in sequence: High, Medium, Low, and Off.

NOTE: Pull the chain slowly to change settings. Release slowly to preven the chain from recoiling into the blades. The chain uses a breakaway connector that separates if the chain is jerked. If this happens, simply reinsert the chain into the connector.

3. To change the direction of air flow, turn the fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position as. Restart the fan.

troubleshooting

Blue Wire for Optional Independent Light Control (if used for this reason, connect to the light power wire from the ceiling outlet box)

2 White

Wires

2 Black

Wires

2Green Wires

installing8 the blades and blade brackets

1.Attach the blades to the blade bracket with the three blade screws and flat washers provided for each blade. Securely hand tighten the screws.

2.Install the assembled blade and blade bracket to the fan motor. Securely hand tighten the screws. Repeat for each blade assembly.

Problem: Nothing happens; fan does not move.

1.Turn power on, replace fuse, or reset breaker.

2.Loosen canopy, check all wiring connections according to the wiring instructions.

3.Push motor reversing switch firmly up or down to ensure thta the switch is engaged.

4.Pull the pull chain to ensure it is on.

5.Remove the shipping bumpers.

Problem: Noisy operation.

1.	Tighten the blade bracket screws until snug.
2.	Tighten the blade screws until snug.
3.	Check to see if the blade is cracked. If so, replace all

6the canopy

1.Tuck the wires into the outlet box with the wire nuts pointed upwards, so that the WHITE and BLACK wires are on opposite sides of the outlet box and all wires are clear of the bracket opening.

2.Loosen the 2 canopy screws in the mounting bracket. Raise the canopy to the mounting bracket, assuring that now wires are pinched, and pass the canopy screws through the keyholes in the canopy.

3.Rotate the canopy counter clockwise to engage the keyholes. Tighten the canopy screws firmly by hand

only.installing

Canopy

Canopy Screw

Blade Screw

Flat Washer

Blade

Bracket

Screw

the blades.

Problem: Excessive wobbling.

1.Tighten all blade and/or blade bracket screws.

2.Turn power off, support fan very carefully, and check that the hanger ball is properly seated.

41615-01 specifications

The Hunter Fan 41615-01 is a stunning ceiling fan that effortlessly combines style with functionality, making it a perfect addition to any modern home. Known for its sleek design and advanced technology, this ceiling fan from Hunter Fan Company is geared towards providing optimal airflow and energy efficiency.

One of the most notable features of the Hunter 41615-01 is its powerful motor. The fan is equipped with a Whisper Wind motor that delivers a strong yet silent performance, making it ideal for bedrooms, living rooms, or any quiet space where noise reduction is a priority. This motor not only ensures a powerful airflow but operates at multiple speed levels, allowing users to customize their comfort according to their preferences.

The fan is designed with a contemporary aesthetic in mind, making it suitable for various interior styles – from modern to traditional. It boasts three elegantly designed blades that are crafted for maximum air movement. The clean lines and smooth finish give it a polished look, enhancing the overall decor of any room.

Energy efficiency is a key characteristic of the Hunter 41615-01. It is compatible with smart home technologies, enabling users to control it remotely or set schedules for optimum energy usage. This feature is perfect for environmentally conscious users looking to reduce their energy footprint while enjoying the comfort of a well-ventilated space.

Installation of the fan is straightforward, thanks to its easy-to-follow instructions and included hardware. The fan is also adaptable to various ceiling heights, as it comes with a downrod that can be adjusted based on the user's needs. This versatility enhances its appeal for different room types, from high-ceilinged spaces to standard-height rooms.

Another noteworthy characteristic is its versatility in lighting options. Some variants of the Hunter 41615-01 come with integrated lighting, allowing users to seamlessly combine illumination with cooling. This dual functionality is efficient for both aesthetic and practical purposes, as it eliminates the need for additional light fixtures.

In summary, the Hunter Fan 41615-01 is an exemplary ceiling fan that combines exquisite design with advanced technology and energy efficiency. Its powerful silent motor, stylish blades, compatibility with smart home systems, and versatile installation options make it a valuable addition to any home. Whether you're looking to beat the heat in summer or circulate warm air in winter, this ceiling fan delivers comfort and elegance all year round.