Hunter Fan 44805 Grounding Instructions, This unit is suitable for grounded receptacle use only

Page 4

Grounding Instructions

ENGLISH

This appliance is for household use only and may be plugged into any 120-volt AC electrical outlet (ordinary household current). DO NOT use any other type of outlet.

Warning

This unit is suitable for grounded receptacle use only.

The power cord has a grounded plug as shown in Figure 1A. The fan must be plugged into an electrical outlet that can accommodate the grounding pin. If your electrical outlet can not accommodate the grounding pin, then you must purchase and install one of the two types of adapters shown in Figure 1B.

Grounded

Plug

Grounding

Pin

Grounded

Outlet

Figure 1A

Grounded

Outlet

Adapter

(Sold Separtely)

Grounding

Means

Figure 1B

LINE CORD SAFETY TIPS

1.NEVER pull or yank on the cord or the appliance.

2.To insert plug, grasp it firmly and guide it into the outlet.

3.To disconnect the appliance, grasp the plug and remove it from the outlet.

4.Before each use, inspect the line cord for cuts and/or abrasion marks. If any are found, the appliance should be serviced and the line cord replaced. Please return it to our Service Department or to an authorized service representative.

5.NEVER wrap the cord tightly around the appliance, as this could place undue stress on the cord where

it enters the appliance and could cause it to fray and break.

6.DO NOT operate appliance if the line cord shows any damage, if the appliance works intermittently or stops working entirely.

44805

[4]

10/23/2008

Image 4
Contents Sherpa Cart Fan Important Safety Information Read & Save These InstructionsWelcomeUnpacking Grounding Instructions This unit is suitable for grounded receptacle use onlyAssembly Assembly Adjusting Height of FAN Adjusting Tilt ResistanceOperation Electrical BOXCarrying a Load Halogen LightsFAN Speed Troubleshooting SolutionForm #44805 Hunter Fan Co