Basic Playback and Recording
Switching On for the First Time
The next few pages take you through switching on the
1
INPUT | MONITOR | TIME |
SELECTOR |
2,4 5,6 5
DIGITAL | ANALOG |
REC LEVEL | REC LEVEL |
REPEAT |
1 Switch the POWER to _ ON.
The function indicator flashes, and the main display panel lights.
❖Also make sure that your amplifier is switched on and the input function set to the
2 Press OPEN/CLOSE 0 to open the disc tray.
3 Load a pre-recorded audio CD.
Place the disc in the disc tray
❖ The disc tray has guides for both CD singles (8cm/ 3 inch) and regular CDs (12cm/ 5 inch).
Do not use an adaptor when playing CD
singles: it could damage the recorder.
❖Never load more than one disc at a time.
4 Press OPEN/CLOSE 0 to close the disc tray.
Once the recorder has found out what's on the disc you should see a display that looks something like this:
Number of tracks on disc
Total playing time of disc
Indicates a
Basic Playback and Recording
5,6
ë |
|
|
|
FADER | FINALIZE |
| REC |
DIGITAL | ERASE | AUTO/ | TRACK NO. |
SYNCHRO | MANUAL | WRITE | |
7 | 8 | 3 | TIME |
1 Á 4 ¢ | |||
INPUT | SKIP | SKIP ID | |
SELECTOR | PLAY | SET | CLEAR |
1 | 2 | 3 | 4 |
5 | 6 | 7 | 8 |
9 | 10/0 | >10 | REPEAT |
PROGRAM | CHECK | CLEAR | RANDOM |
COMPACT DISC RECORDER |
| ||
REMOTE CONTROL UNIT |
| ||
❖Lightly pushing the tray or pressing 3 (play) will also close the disc tray. (If you press 3 to close the tray, you won’t see the above display.)
5 Press 3 (play) to start the disc playing.
❖Pressing the jog dial on the front panel also starts playback.
❖To temporarily pause playback, press 8 (pause). To resume playback, press either 8 (pause) again, or 3 (play). If the recorder remains paused for 10 minutes, it reverts to stop mode.
❖Press and hold the 1 (fast reverse) and Á (fast forward) buttons to search through tracks in either direction at high speed.
6 When you're done, press 7 (stop).
❖Take out the CD from the disc tray before switching off the unit.
15
