Pioneer PDR-509 manual Erase, 8jog dial, When a finalized disc is loaded, Press ERASE

Additional Recording Features

When a finalized disc is loaded:

ERASE

×óB-.?/

INPUT	MONITOR	TIME
SELECTOR

Function indicator lights when erasing

COMPACT DISC DIGITAL RECORDER

1 Press ERASE.

The display shows ERASE and TOC? and the recorder function indicator blinks to indicate erase standby mode.

❖Press 7 (stop) to cancel erase here.

2 Use the jog dial or 4 and ¢ buttons on the remote control to change the erase option.

Switch between:

TOC? – erase the table of contents (returns disc to a non-finalized state) ALL? – erase all tracks

3 Press 8 (pause) to start erasing.

The function indicator lights and the display shows ERS (erase), and the time remaining to completion.

❖You can halt this erase process by holding down the 7 (stop) button for 10 seconds.

8jog dial

DIGITAL	ANALOG
REC LEVEL	REC LEVEL

REPEAT

Re-initializing a disc

1 Press and hold ERASE for about four seconds.

The recorder prompts you to confirm with the message ALL DISC ERASE? and the recorder function indicator blinks to indicate erase standby mode.

❖Press 7 (stop) to cancel all disc erase here.

2 Press 8 (pause) to start erasing.

The process takes about five minutes plus the entire length of the disc. During this time, the function indicator lights and the display shows dE (disc erase), followed by the remaining time to completion.

❖You can halt this erase process by holding down the 7 (stop) button for 10 seconds.

Additional Features

	ë￿
	FADER	FINALIZE		REC
	DIGITAL	ERASE	AUTO/	TRACK NO.
	SYNCHRO		MANUAL	WRITE	ERASE
8	7	8	3	TIME
	1 Á￿		4 ¢￿		4 ¢
	INPUT	SKIP	SKIP ID
	SELECTOR	PLAY	SET	CLEAR
	1	2	3	4
	5	6	7	8

35