Pioneer PDR-509 manual Understanding Display Messages, Additional Information

Additional Information

Understanding Display Messages

Below is a list of messages you’ll see during normal operation of the PDR–509 together with a brief explanation of what they mean. If you need more information, turn to the page indicated.

Message	Description	Reference
OPEN	The disc tray is open.	p.15
CLOSE	The disc tray is closing.	p.15
SET UP	The unit is setting up for recording. Wait for the message to disappear.
TOC READ	The recorder is reading the disc’s TOC (Table of Contents). Wait for the
	message to disappear.
1-SYNC	The unit is in 1-track automatic digital recording mode. Recording starts when	p.20
	the recorder detects the digital source input signal.
AL-SYNC	The unit is in all-track automatic digital recording mode. Recording starts when	p.21
	the recorder detects the digital source input signal.
CAN NOT SYNC	This display appears when the DIGITAL SYNCHRO button is pressed if the INPUT
	SELECTOR is set for an analog source, or in digital mode if the source selected
	is not recognized as CD, MD, DAT, or DCC.
MONI INPUT	The recorder is monitoring the input selected with the input selector. The unit	p.32
(CD, MD, DAT, DCC,DVD)	displays the source it is monitoring (CD, MD, DAT,DCC, or DVD).
PMA REC	The recorder is writing TOC data to the disc’s PMA (Program Memory Area).
	Never turn off the power while this display is showing.
TRACK ?	The recorder is waiting for you to enter a track in program play mode. Select a	p.26
	track using the numeric buttons, 4 and ¢ (track skip) buttons, or jog dial.
SKIP SET?	Confirm that you want to set a skip ID by pressing the SKIP ID SET button.	p.28
SKIP CLEAR?	Confirm that you want to set a skip ID by pressing the SKIP ID CLEAR button.	p.29
LAST ?	Confirm that you want to erase the last track of a CD–RWdisc by pressing 8	p.34
	(pause).
ALL ?	Confirm that you want to erase all tracks on a CD–RWdisc by pressing 8	pp.34–35
	(pause).
TOC ?	Confirm that you want to erase the TOC of a finalized CD–RWdisc to return it to	p.35
	a non-finalized state. After doing this, you can record more material on the disc.
** - [LAST] ?	Confirm that you want to erase tracks recorded on a CD–RWdisc .	p.34
(** is a number)
ALL DISC ERASE?	Confirm that you want to re-initialize the CD–RWdisc by pressing 8 (pause).	p.35
CD-R CD-RW	This display is for in-store demonstration purposes. The demonstration stops
	when any key or control is operated. If no key or control is pressed for about
	three minutes after the demonstration was stopped, it will start again.
	To start the demonstration mode, switch on the power with a disc loaded and
	press 1 as soon as the display reads 01 00:00.
	To cancel the demonstration mode, switch on the power with a disc loaded
	and press Á as soon as the display reads 01 00:00.

36