Hunter Fan 42797-01 installation manual Assembling tbe Blades Assembling the Blades

Page 12

3 • Assembling tbe Blades

8 • Assembling the Blades

Fan Motor

Holes

Step 8-1

8-1. Insert blade into slot. Align the holes on the blade with the holes in the fan motor.

8-2. Slide flat washers onto the shafts of the blade assembly screws.

8-3. Attach the blade to the motor using the blade assembly screws.

8-4. Repeat for each blade.

Blade Assembly

Screw

Step 8-2

Flat Washer

12

42797-01 • 11/13/08 • Hunter Fan Company

Image 12

Contents Type 3 Models Welcome Installer’s Choice and Optional Accessories Getting Ready Gathering the ToolsInstalling the Ceiling Plate Assembling the Top Housing Assembling and Hanging the Fan Steps 4-4Setting the Remote Transmitter and Receiver Setting Transmitter and Receiver CodesWiring the Fan Wiring the Fan Installing the Canopy Assembling tbe Blades Assembling the Blades Completing Your Installation Operating the Remote Control and Mounting the Holder Operating and Cleaning Your Ceiling Fan Beat the High Cost of Cooling Troubleshooting Problem Nothing happens fan does not move