Hunter Fan 42890-01 installation manual Uninstalling the Light Fixture

Page 13

7 • Completing Your Installation With or Without a Bowl Light Fixture

Uninstalling the Light Fixture

7-11. Loosen and remove finial from threaded rod.

7-12. Remove Light kit from lower switch housing.

7-13. Disconnect the plug connector.

7-14. Place extra cover over the threaded rod.

7-15. Place breakaway connector on the end of the pull chain

7-16. Place breakaway connector inside of the finial and push pull chain back inside of the threaded rod.

7-17. Tighten finial on threaded rod.

Note: The breakaway connector should stop the pull chain from coming through the finial.

Plug

Connector

Rod

Finial

Steps 7-15 - 7-17

Rod

Chain

 

Cap

 

Finial

 

21

-

Steps7-18

- 7-221

13

42890-01 • 02/18/10 • Hunter Fan Company

Image 13
Contents Type a Models Welcome Mounting and Optional Accessories Getting Ready Installing Multiple Fans?Installing the Hanger Bracket Assembling and Hanging the Fan Dual Switch Wiring Wiring the FanSingle Switch Wiring Installing the Motor Housing Assembling the Blades Housing Assembly Upper Screw Switch Steps 7-6 Place globe over threaded lampholder in cup Installing the Glass ShadesUninstalling the Light Fixture Operating and Cleaning Your Ceiling Fan Problem Nothing happens fan does not move TroubleshootingProblem Noisy operation Problem Excessive wobbling