Hunter Fan 42890-01 installation manual Operating and Cleaning Your Ceiling Fan

Page 14
14
42890-01 • 02/18/10 • Hunter Fan Company
Reversing Switch
Turn the fan off and let it come to a complete stop. Slide the reversing switch on the fan to the opposite position. Restart fan.
To Change Airflow Direction
For cleaning finishes, use a soft brush or lint-free cloth to prevent scratching. A vacuum cleaner brush nozzle can remove heavier dust. Remove surface smudges or accumulated dirt and dust using a mild detergent and a slightly dampened cloth. You may use an artistic
agent, but never abrasive cleaning agents as they will damage the finish.
The light pull chain controls power to the light. The pull chain has two settings: On and Off.
Ceiling fans work best by blowing air downward (counterclockwise blade rotation) in warm weather to cool the room with a direct breeze. In winter, having the fan draw air upward (clockwise blade rotation) will distribute the warmer air trapped at the ceiling around the room without causing a draft.
The blades on this fan have been treated with Hunter’s Dust Armor protection, making the blades less likely to attract dust and dirt. Use a dry or slightly damp lint free cloth to clean the blades. Do not use a furniture polish or any other cleaners that leave any residue, as they will damage the protective Dust Armor on the blades.
The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low and Off.

8 • Operating and Cleaning Your Ceiling Fan

8-1. Turn on electrical power to the fan. 8-2.

Pull the chain slowly to change settings.

Release slowly to prevent the chain from recoiling into the blades.

The chain uses a breakaway connector that separates if the chain is jerked. If this happens, simply reinsert the chain into the connector.

8-3.

8-4.

8-5.

8-6.

In warm weather, use downward air flow pattern

In cold weather, use upward

air flow pattern

Image 14
Contents Type a Models Welcome Mounting and Optional Accessories Installing Multiple Fans? Getting ReadyInstalling the Hanger Bracket Assembling and Hanging the Fan Single Switch Wiring Wiring the FanDual Switch Wiring Installing the Motor Housing Assembling the Blades Housing Assembly Upper Screw Switch Steps 7-6 Installing the Glass Shades Place globe over threaded lampholder in cupUninstalling the Light Fixture Operating and Cleaning Your Ceiling Fan Problem Noisy operation TroubleshootingProblem Nothing happens fan does not move Problem Excessive wobbling