Hunter Fan 42890-01 installation manual Assembling the Blades

Page 9

6 • Assembling the Blades

Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan).

6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades.

6-2. Attach each blade to a blade iron using three blade assembly screws. If you used grommets, the blades may appear slightly loose after screws are tightened. This is normal.

6-3. Remove the blade mounting screws and rubber shipping bumpers from the motor. Note: Some blade mounting screws are installed in the motor to secure shipping blocks.

6-4. For each blade, insert one blade mounting screw through the blade iron, and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both mounting screws.

Note: The blades on this fan have been treated with Hunter’s Dust Armor protection, making the blades less likely to attract dust and dirt.

Use a dry or slightly damp lint free cloth to clean the blades. Do not use a furniture polish or any other cleaners that leave any residue, as they will damage the protective Dust Armor on the blades.

Step 6-1 (Detail)

Grommet

Steps 6-16-2

Use with grommet

Blade Assembly

Screws

 

 

 

 

Step 6-4

 

 

 

 

 

 

 

 

Blade

 

 

 

 

Mounting

 

Use without grommet

Screw

9

42890-01 • 02/18/10 • Hunter Fan Company

Image 9
Contents Type a Models Welcome Mounting and Optional Accessories Getting Ready Installing Multiple Fans?Installing the Hanger Bracket Assembling and Hanging the Fan Wiring the Fan Dual Switch WiringSingle Switch Wiring Installing the Motor Housing Assembling the Blades Housing Assembly Upper Screw Switch Steps 7-6 Place globe over threaded lampholder in cup Installing the Glass ShadesUninstalling the Light Fixture Operating and Cleaning Your Ceiling Fan Problem Nothing happens fan does not move TroubleshootingProblem Noisy operation Problem Excessive wobbling