Hunter Fan 42774-01 installation manual Assembling the Top Housing

Page 8

3 • Assembling the Top Housing

3-1. To assemble the housing to the hanger adapter, align the three raised tabs on the hanger adapter with the three narrow notches in the top housing. Make certain the housing sits flat on the adapter.

3-2. Install three (3) assembly screws (#8-32) and tighten them securely.

Steps 3-1 – 3-2

Assembly Screw

Top Housing

Hanger Adapter

42774-01 • 06/12/09 • Hunter Fan Company

Image 8

Contents TypeT Models Table Of Contents WelcomeChecklist for Existing Fan Site Preparing the Fan SiteChoose the Fan Site Choose a fan site whereInstall a Support Brace, If Necessary Install the Outlet BoxPrepare the Wiring Cut the Ceiling HoleConsidering Optional Accessories Installer’s Choice and Optional AccessoriesUnderstanding Mounting and Installer’s Choice Installing Multiple Fans? Getting ReadyGathering the Tools Checking Your Fan PartsInstalling the Ceiling Plate Assembling the Top Housing For Low Profile mounting Assembling and Hanging the FanFor Standard or Angled mounting Wiring the Fan Single Switch WiringInstalling the Canopy and Canopy Trim Ring Assembling the Blades Installing the Switch Housing Operating and Cleaning Your Ceiling Fan To Change Airflow DirectionTroubleshooting Problem Nothing happens fan does not moveProblem Noisy operation Problem Excessive wobbling