Hunter Fan 42405-01 warranty Assembling the Blades, Detail, Steps 6-1

Page 9

Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan).

6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades.

6-2. Attach each blade to a blade iron using three blade assembly screws. If you used grommets, the blades may appear slightly loose after screws are tightened. is is normal.

6-3. Some blade mounting screws are installed in the motor to secure shipping blocks. Remove the blade mounting screws and rubber bumpers from the motor. Save the screws and discard the bumpers.

6-4. For each blade, insert one blade mounting screw through the blade iron, and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both mounting screws.

6 • Assembling the Blades

Step 6-1 (Detail)

Grommet

 

 

Blade Assembly

Use with grommet

 

Screws

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Use without grommet

Blade Mounting

Screw

Steps 6-16-2

9

Step 6-4

42405-01 • 01/20/06

Hunter Fan Company

Image 9
Contents For Your Records and Warranty Assistance Table of Contents WelcomeHunter Fan Company Installer’s Choice and Optional Accessories Standard Mounting hangs fromAngle Mounting recommended for a vaulted or angled ceiling Getting Ready Installing Multiple Fans?Step Steps 2-3 Installing the Ceiling PlateFor Standard or Angled Mounting Assembling and Hanging the FanFor Low Profile Mounting Steps 3-2Single Switch Wiring Wiring the FanStep Installing the CanopyAssembling the Blades DetailSteps 6-1 Steps 7-5 Steps 7-1Operating and Cleaning Your Ceiling Fan To Change Airflow DirectionCold weather , use upward Problem Nothing happens fan does not move TroubleshootingProblem Noisy operation Problem Excessive wobbling