Hunter Fan 45006-0109 warranty Installing the Canopy and Canopy Trim Ring, Bracket & Wiring

5 • Installing the Canopy and Canopy Trim Ring

5-1. Partially install two canopy screws (about 2 full turns) in the hanger bracket.

5-2. Raise the canopy over the hanger bracket. Align partially installed screws with key slots in canopy.

5-3. Twist canopy clockwise to secure.

Steps 5-1 – 5-2 Hanger Bracket

Bracket & Wiring

5-4. Install third & fourth canopy screw in round hole on canopy. Securely tighten all four screws.

5-5. Using both hands, push the canopy trim ring up to the top of the canopy.

5-6. Twist canopy trim ring clockwise to secure the canopy.

Should you need to remove the canopy trim ring, follow these steps:

1.Twist canopy trim ring counter clockwise until it releases from canopy.

Canopy

Canopy Trim

Ring

Step 5-3

Install

Step 5-4

Step 5-5	Canopy
	Screw

9

45006-01 • 09/26/07 • Hunter Fan Company