Hunter Fan 45006-0109 warranty Close Open, Assembling the Blades

Page 11

6 • Assembling the Blades

Our exclusive Easy Lock™ blade assembly enables you to lock the blades in place without tools and to remove the blades easily for cleaning.

6-1. Open the locking mechanism.

6-2. Align the holes in the blade with the blade iron.

6-3. Close the locking mechanism securely. You will feel it lock into place.

6-4. Repeat steps 6-1 through 6-3 until all blades are installed.

10

Close

Open

Step 6-1

Step 6-3

Attach EasyLockTM Blades

45006-01 • 09/26/07 • Hunter Fan Company

Image 11

Contents Type 2 Models Installation is complete Welcome Installer’s Choice and Optional Accessories Getting Ready Installing Multiple Fans?Install Bracket & Wiring Installing the Hanger BracketRaise the fan and place the ball into the hanger bracket Go to 4 Wiring the FanAssembling and Hanging the Fan Assemble securely with three #8-32 x 1/2 screws Fan assemblyAssembling and Hanging the Fan Low Profile Only Remove the screws from the hanger ball bracketBlack wire ungrounded from the ceiling to the black Wiring the FanDual Switch Wiring Single Switch WiringBracket & Wiring Installing the Canopy and Canopy Trim RingAssembling the Blades Close OpenScrew the finial onto the threaded rod end until tight Installing the Glass BowlGo to 8 Operating and Cleaning the Fan Uninstalling the Light Fixture Install bulbs & GlassTo Change Airflow Direction Operating and Cleaning Your Ceiling FanTurn on electrical power to the fan Problem Excessive wobbling TroubleshootingProblem Nothing happens fan does not move Problem Noisy operationBeat the High Cost of Cooling