Troubleshooting
Fan doesn’t work
•Make sure power switch is on.
•Pull the pull chain to make sure it is on.
•Push the motor reversing switch firmly left or right to ensure that it is engaged.
•Check the circuit breaker to ensure the power is turned on.
•Make sure the blades spin freely.
•Turn off power from the circuit breaker, then loosen the canopy and check all the connections according to the wiring diagram on page 10.
•Check the plug connection in the switch housing.
Excessive wobbling
•Tighten all of the blade and blade iron screws until they are snug.
•Turn the power off, support the fan carefully, and check that the hanger ball is properly seated.
•Use the provided balancing kit and instructions to balance the fan.
www.HunterFan.com 1.888.830.1326 
Noisy Operation
•Tighten the blade and blade iron screws until they are snug.
•Check to see if any of the blades are cracked. If so, replace all of the blades.
17