Light Kit | www.HunterFan.com |
1.888.830.1326
Switch
Housing
Screw
Partially install two of the switch housing screws found in the 
bag. Connect the plugs from the upper and lower switch housings. Make sure to line up the colored markings on the connectors.
Notch 
Switch
Housing
Screw
Align the notches in the sides of the lower | Install the third switch housing screw. |
switch housing with the upper switch | Tighten all three screws securely. |
housing screws. Lift the lower switch housing. |
|
Twist the lower switch housing clockwise |
|
to lock into place. Then thread the fan |
|
pull chain through the hole in the light kit. |
|
Want to install your fan without a light kit? |
|
| Make sure the lower switch housing is securely attached to | |
Go to www.HunterFan.com/FAQs and click |
|
| the upper switch housing. Failure to properly secure all three | |
|
| switch housing screws could result in the light fixture falling. | ||
“How do I install my fan without the light kit?” |
|
|
| |
| 12 |
|
| |
|
|
|
| |
|
|
|
|
|