Fused Plug
This plug is a safety feature. It contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is damaged. To reduce the risk of fire, electric shock and personal injury, DO NOT remove, replace, repair or tamper with the originally supplied plug. If the Fan does not function properly, it may be due to the safety device incorporated in this plug.
If the fuse fails, it is generally due to a short circuit or circuit overload. Replace the fuse as per the instructions below. If the replacement fuse fails, immediately unplug the unit and contact our technical support department for assistance.
Fuse Replacement:
1.To replace the fuse, first turn the unit it off and unplug it from the wall. Locate the door on top of the plug. Figure 1.
2.Slide the door on top of the plug towards the blades. Figure 2.
3.Carefully remove the fuse from the clips holding it on the top and bottom. Figure 3.
Warning! Electrical Hazard! Only replace with a fuse type and rating matching what was removed from the product.
4.Gently push the fuse back into the pins that will hold it in place.
Note: If the fuse is not seated properly, the unit will not function.
5.Slide the Door back over the fuse box in the plug.
6.Plug the fan back in and resume use.
Figure 1.
Figure 2.
Figure 3.
©2010 Hunter Fan Co. | 6 |