HoMedics WFL-ETN instruction manual Maintenance, Troubleshooting

Page 4

WFL-ETN-A_SP.qxd 2/22/06 3:35 PM Page 7

6.Fill base with clean water. Add enough water so that the platform is submerged.

(See embossed line inside the fountain base that represents the water fill line.) (Fig. 6)

Figure 6

Platform

7.Attach the A/C adaptor jack to the base power cord. DO NOT plug into outlet at this time. (Fig. 1)

8.Set the fountain on a level, waterproof surface.

9.Plug the cord into 120V household outlet. The switch located on the power cord controls the fountain. If pump doesn't operate, rotate in-line switch once to turn “on” and once more to turn “off”. Monthly maintenance will add to your pump's life.

NOTE: Ensure that the electrical cord loops below the electrical outlet to form a 'Drip Loop' (Fig. 7). This will prevent water from running down the cord into the electrical outlet.

Figure 7

Figure 8

PVC Tubing

Inserts Here

Back Plate

ImpellerHousing

Drip Loop

Pump Inlet

Front Plate

Suction Feet

Flow

Control

Lever

6

Maintenance

• To clean the pump:

Unplug from electrical outlet. Remove it from the base of the fountain. Use a small brush or stream of water to remove any debris (Fig 8).

• To keep water clean:

Periodically change water and clean the product according to the water condition. Keeping the water clean prevents the water from becoming sticky and forming micro-organisms. We recommend distilled water to prevent mineral build-up.

• To clean off hard water deposits on the base:

Soak the container in a mixture of vinegar and water to clean and remove any mineral build-up.

• Keeping the water at an optimum level:

Add water periodically to keep water level at an optimum level to avoid shortening the life of the pump.

NOTE: Never let the pump run dry, as this will shorten the life of the pump.

• Fountain storage

Unplug the fountain from the electrical outlet, empty the water, and store fountain in a dry, cool place.

Troubleshooting

• If water of rainfall holes fails to flow:

Take off lid and remove cleaning pin. Stick the cleaning pin through holes several times. (Fig. 9) Then replace lid on top of the fountain.

• If water of rainfall holes fail to flow straight:

Turn off fountain, use absorbent cloth to dry off the top and bottom of rainfall holes. Turn on fountain. (Repeat if needed until water flows straight.)

• If the pump fails to operate, check the following:

Check the circuit breaker, or try a different outlet to make sure the pump is getting electrical power.

NOTE: Always disconnect from electrical outlet before handling the pump.

• If the pump gurgles, spews, or “burps”:

Check the water level to make sure the pump has enough water to function.

• Obtaining a desired water level:

Check the water level daily the first week to measure the rate of evaporation; refill with water as needed.

Figure 9

Cleaning Pin

7

Image 4
Contents Warranty Information TM Eternal RainGarantía Limitada POR UN AÑO Dirección postal HoMedicsRead ALL Instructions Before Using EnviraScape FeaturesSoothing sounds of nature Assembly and Instructions for Use Cleaning Pin Fountain Top Platform Tube WaterBase Power Cord Minimum Water LevelMaintenance TroubleshootingONE Year Limited Warranty TM Lluvia EternaManual de instrucciones Información de garantía Mail ToLos aliviadores sonidos de la naturaleza Características de EnviraScapeLEA Todas LAS Instrucciones Antes DE Usar Peligro Para reducir el riesgo de choque eléctricoArmado e instrucciones de uso Base Cordón Eléctrico de la BaseDiagnóstico y resolución de problemas Mantenimiento

WFL-ETN specifications

The HoMedics WFL-ETN is a high-quality air purifier designed to enhance indoor air quality and promote a healthier living environment. This innovative device integrates advanced technologies and features, focusing on making the air in your home cleaner and fresher.

One of the standout features of the WFL-ETN is its multi-stage filtration system. It utilizes a HEPA filter that effectively captures 99.97% of airborne particles as small as 0.3 microns, including allergens, dust, pet dander, and smoke. This level of filtration is ideal for individuals with allergies or respiratory issues, providing peace of mind by ensuring that the air they breathe is as clean as possible.

In addition to the HEPA filter, the WFL-ETN includes a pre-filter that helps capture larger particles, extending the life of the HEPA filter. This dual-layer approach to air purification enhances the overall efficiency of the device and reduces the frequency of filter changes, ultimately saving users time and money.

Another notable technology incorporated into the WFL-ETN is its activated carbon filter. This component is crucial for removing odors and volatile organic compounds (VOCs) that can be found in household products and furniture. The activated carbon works by adsorbing these harmful gases, helping to create a more pleasant indoor atmosphere.

The HoMedics WFL-ETN also features a sleek and modern design, making it a stylish addition to any room's decor. Its compact size allows it to fit seamlessly into various spaces, whether in a bedroom, living room, or office. Moreover, the intuitive control panel offers user-friendly operation, with settings that can be easily adjusted to suit personal preferences and air quality needs.

To enhance user experience, this air purifier operates quietly, making it suitable for overnight use without disturbing sleep. Additionally, the WFL-ETN includes a filter change indicator, alerting users when it's time to replace the filters, thus ensuring optimal performance at all times.

Overall, the HoMedics WFL-ETN air purifier is an impressive solution for anyone looking to improve indoor air quality. With its advanced filtration technologies, sleek design, and ease of use, it's a product that stands out in the crowded air purification market. Whether for allergy relief or simply to create a fresher living environment, the HoMedics WFL-ETN proves to be a valuable addition to any home.