Installation Instructions

The HAI UPB™ Lamp Module is simply plugged into a standard 120VAC wall outlet.

Load Information

The total load of the UPB™ controlled outlet must not exceed 300 Watts.

HAI LAMP MODULE OPERATION

The HAI Lamp Module has many configurable items that can be set using the UPB™ UPStart configuration software. The following describes the operation of the HAI Lamp Module in its factory default configuration.

Lamp Switch Trigger Operation

The Lamp Module can be configured to sense the lamp’s local on/off switch to turn the lamp on even after it was turned off via UPB™ control. By default, the Lamp Module has the lamp switch trigger operation enabled.

Note: This feature may not work for all types of loads (i.e. fluorescent lighting loads) and may have to be disabled.

LED Indicator

The HAI UPB™ Lamp Module comes equipped with a multi-color LED indicator that is normally lit to blue when the load is off. The LED will turn off when the load is turned on or set to any level 1-100%.

Test Mode

The Lamp Module’s controlled outlet can be tested using its Test Mode. The Lamp Module can be put into Test Mode by the following steps:

Step	Operation
1	Press and hold the pushbutton for at least 3 seconds to enter Test Mode
2	The HAI UPB™ Lamp Module will continuously flash its LED magenta to indicate that it’s in Test Mode. Note: the
	lamp module will automatically exit Test Mode after 5 minutes.
3	Press the pushbutton 1 time to turn the UPB™ controlled outlet on and off
4	Press and hold the pushbutton for at least 3 seconds to exit Test Mode

Setup Mode

To configure the HAI UPB™ Lamp Module using an HAI controller or a PC running the UPB™ UPStart configuration software, it must be put into Setup Mode as follows:

Step

Operation

1Press the pushbutton switch quickly 5 times

2The HAI UPB™ Lamp Module will flash the lighting load one time and blink its LED blue to indicate that it is in Setup Mode. Note: the lamp module will automatically exit Setup mode after 5 minutes.

Reset to Factory Default Settings

To reset the HAI UPB™ Lamp Module to factory default settings:

Step	Operation
1	On the HAI UPB™ Lamp Module that you want to reset to factory defaults, press the pushbutton switch quickly 5 times.
2	The HAI UPB™ Lamp Module will flash the lighting load one time and blink its LED blue to indicate that it is ready to
	be set to factory defaults.
3	Press the pushbutton switch quickly 10 times to reset to factory default setting.
4	The HAI UPB™ Lamp Module will flash the lighting load one time and blink its LED red to indicate that it has been
	reset.
5	Press the pushbutton switch once more to stop the LED from blinking.

59A00-1 specifications

Home automation has seen a remarkable evolution over the years, and one of the standout products in this domain is the Home Automation 59A00-1. This state-of-the-art device represents the future of smart home technology, seamlessly integrating multiple features and functionalities aimed at enhancing convenience, security, and efficiency within residential environments.

One of the primary features of the Home Automation 59A00-1 is its user-friendly interface, which allows homeowners to control various aspects of their home with ease. The device comes equipped with a comprehensive mobile application that is compatible with both Android and iOS platforms. This ensures that users can manage their home automation system from anywhere, whether they're at work or on vacation.

In terms of connectivity, the Home Automation 59A00-1 utilizes advanced wireless technologies such as Wi-Fi, Zigbee, and Z-Wave, allowing it to communicate efficiently with a wide array of smart devices, including lights, thermostats, and security cameras. This interoperability means that users can customize their smart home experience by choosing devices from different manufacturers without worrying about compatibility issues.

Security is a paramount concern for many homeowners, and the 59A00-1 addresses this with robust features that include real-time alerts, surveillance integration, and automated locking mechanisms. Users can set up notifications for unusual activity and monitor their property remotely, thereby enhancing their peace of mind.

Energy efficiency is another key characteristic of the Home Automation 59A00-1. The device features intelligent energy management systems that allow homeowners to track energy consumption and automate energy-saving measures. This not only helps to reduce utility bills but also promotes a sustainable lifestyle.

The 59A00-1 encourages user customization through its adaptable control settings, allowing homeowners to set specific automation schedules, modes, and preferences. Voice control compatibility with popular virtual assistants like Amazon Alexa and Google Assistant expands its functionality, making it a truly hands-free experience.

Finally, the aesthetic appeal of the Home Automation 59A00-1 should not be overlooked. Its sleek design blends seamlessly into modern home decor, making it as visually pleasing as it is functional.

In conclusion, the Home Automation 59A00-1 is a comprehensive solution for anyone looking to transition to a smarter home. With its multitude of features, robust security measures, energy efficiency tools, and sleek design, it stands out as an excellent investment for the modern homeowner seeking to embrace the future of living.