Grizzly G0631 owner manual Maintenance, Schedule, Cleaning, Filters

Page 21
-19-

SECTION 6: MAINTENANCE

Always disconnect power to the machine before performing maintenance. Failure to do this may result in serious person- al injury.

Schedule

For optimum performance from your machine, follow this maintenance schedule and refer to any specific instructions given in this section.

Daily Check:

•Check filters.

•Dust drawers.

•Loose mounting bolts.

•Worn or damaged wires.

•Any other unsafe condition.

Weekly Maintenance:

•Check filters.

•Dust drawers.

Monthly Check:

•Clean/vacuum dust buildup from inside cabi- net and off motors.

Cleaning

Cleaning the Model G0631 is relatively easy. Vacuum excess sawdust, and wipe off the remain- ing dust with a dry cloth. If any resin has built up, use a resin dissolving cleaner to remove it.

G0631 79" x 28" Downdraft Table

Filters

The filters may need to be serviced or replaced if suction is noticeably reduced. The amount of use has a direct bearing on how often you must ser- vice or change the 1" prefilter and 2" filter.

Keep the downdraft table unplugged during all maintenance procedures. Ignoring this warning may result in serious personal injury to you or others!

Always wear a dust mask and safety glasses when servicing and changing filters. Sawdust may cause allergic reactions or respiratory problems.

To service the filters:

1. DISCONNECT POWER TO THE DOWNDRAFT TABLE!

2. Remove the two outside downdraft plates, remove the filters, and gently knock the filters out inside a garbage can.

Note: Generally this technique will work two or three times, then you will have to replace the filter.

3.Reinstall the filters and the downdraft plates.

To change a filter:

1. DISCONNECT POWER TO THE DOWNDRAFT TABLE!

2.Remove the outside downdraft plates, remove the filters, install new filters, and reinstall the plates.

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Model G0631 79 X 28 Downdraft Table Page Table of Contents Introduction ForewordContact Info Machine Data Set Identification Safety Instructions for Machinery G0631 79 x 28 Downdraft Table MAINTENANCE/SERVICE. Problems con Additional Safety for Downdraft Tables110V Operation Circuit RequirementsSetup Safety SetupItems Needed for Setup UnpackingBox 1 Figure Qty InventoryHardware Recognition Chart Moving & Placing Base Unit Site ConsiderationsAssembly Components and Hardware Needed QtyTo assemble the downdraft downdraft table Outlet plate handles mounted Center Panel Latch Left To test run the downdraft table Test RunOperations Operation Safety Dust DrawersOperation To use the Model G0631H3120-Palm Detail Sander AccessoriesH1300 H1298 G7984 H2347 H0736 Our most popular safety glassesCleaning MaintenanceSchedule FiltersTroubleshooting ServiceElectrical Components Right Switch wiringWiring Diagram Breakdown Description Parts ListDescription Safety Label Placement and Parts ListWarranty and Returns Page Page

G0631 specifications

The Grizzly G0631 is a versatile woodworking machine designed for both hobbyists and professionals seeking to enhance their woodworking capabilities. At its core, the G0631 is a powerful 10-inch Table Saw, primarily known for its durability, precision, and convenience in various woodcutting tasks. This machine embodies the combination of traditional craftsmanship and modern technology, making it a popular choice in workshops.

One of the key features of the Grizzly G0631 is its robust construction. The saw boasts a cast iron tabletop that ensures stability during operation, allowing for smooth and consistent cuts. The table measures a generous 27 inches by 40 inches, providing ample workspace for both small and large projects. Additionally, it is equipped with an effective and reliable 3 HP motor that can handle even the toughest hardwoods, ensuring power and performance that meet the high demands of professional-grade cutting.

The G0631 comes with a precision-ground solid cast iron trunnion and an easily adjustable blade tilt that ranges from 0 to 45 degrees. This feature allows users to make accurate bevel cuts, increasing its versatility. Furthermore, the saw utilizes a fine adjustment handwheel for the blade height, ensuring that every cut can be made with utmost accuracy.

In terms of safety, the Grizzly G0631 does not disappoint. It includes a pawl and riving knife system that minimizes the risk of kickback—a common concern among table saw users. The saw is also equipped with a sturdy, easy-to-use blade guard that enhances safety without compromising visibility.

Another standout characteristic of the G0631 is its dust collection efficiency. It comes with a built-in 4-inch dust port that connects to a dust collection system, keeping the workspace cleaner and safer by minimizing wood dust accumulation. This is particularly important in woodworking, where dust can pose health risks and impede workflow.

In summary, the Grizzly G0631 stands out for its solid construction, powerful performance, and user-friendly design. With features designed for safety, precision, and dust management, this table saw is an excellent addition to any woodworking shop, making it easier for users to achieve professional-quality results in their projects. Whether you are a seasoned woodworker or just starting, the G0631 offers the reliability and efficiency needed to elevate your craft.
Top Page Image Contents